dbe

apps/SchemaEditor/SchemaAttributeEditor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 309: Small and focused functions are preferred: dbse::SchemaAttributeEditor::ParseToSave() has 111 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 383: Add #include for string

Warnings

• Line 58: declaration uses identifier 'dbse__SchemaAttributeEditor', which is a reserved identifier
• Line 298: declaration uses identifier 'dbse__SchemaAttributeEditor', which is a reserved identifier
• Line 326: nested namespaces can be concatenated
• Line 177: variable 'AttributeFormat' is not initialized
• Line 317: variable 'AttributeFormat' is not initialized
• Line 45: redundant access specifier has the same accessibility as the previous access specifier
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaClassEditor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 152: If an else has a brace on one side, it should have it on both
• Line 226: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 239: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 241: If an else has a brace on one side, it should have it on both
• Line 247: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 265: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 287: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 308: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 592: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 619: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 640: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 660: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 676: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 692: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 819: If an else has a brace on one side, it should have it on both
• Line 874: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 828: Add #include for string
• Line 187: Add #include for vector<>

Warnings

• Line 91: declaration uses identifier 'dbse__SchemaClassEditor', which is a reserved identifier
• Line 386: declaration uses identifier 'dbse__SchemaClassEditor', which is a reserved identifier
• Line 425: nested namespaces can be concatenated
• Line 203: use nullptr
• Line 208: use auto when initializing with new to avoid duplicating the type name
• Line 211: use auto when initializing with new to avoid duplicating the type name
• Line 212: use auto when initializing with new to avoid duplicating the type name
• Line 242: use nullptr
• Line 249: use auto when initializing with new to avoid duplicating the type name
• Line 308: use auto when initializing with a cast to avoid duplicating the type name
• Line 336: use nullptr
• Line 355: use nullptr
• Line 370: use nullptr
• Line 385: use nullptr
• Line 437: use auto when initializing with new to avoid duplicating the type name
• Line 439: use auto when initializing with new to avoid duplicating the type name
• Line 449: use auto when initializing with new to avoid duplicating the type name
• Line 471: use auto when initializing with new to avoid duplicating the type name
• Line 488: use auto when initializing with new to avoid duplicating the type name
• Line 497: use auto when initializing with new to avoid duplicating the type name
• Line 505: use auto when initializing with new to avoid duplicating the type name
• Line 517: use auto when initializing with new to avoid duplicating the type name
• Line 531: use auto when initializing with new to avoid duplicating the type name
• Line 546: use nullptr
• Line 556: use auto when initializing with new to avoid duplicating the type name
• Line 569: the variable 'ClassName' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 580: the variable 'ClassName' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 592: use auto when initializing with a cast to avoid duplicating the type name
• Line 608: use auto when initializing with new to avoid duplicating the type name
• Line 618: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 674: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 690: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 707: use auto when initializing with new to avoid duplicating the type name
• Line 712: use auto when initializing with new to avoid duplicating the type name
• Line 736: use auto when initializing with new to avoid duplicating the type name
• Line 741: use auto when initializing with new to avoid duplicating the type name
• Line 765: use auto when initializing with new to avoid duplicating the type name
• Line 770: use auto when initializing with new to avoid duplicating the type name
• Line 794: use auto when initializing with new to avoid duplicating the type name
• Line 799: use auto when initializing with new to avoid duplicating the type name
• Line 832: use nullptr
• Line 848: use nullptr
• Line 855: variable 'ok' is not initialized
• Line 862: use auto when initializing with new to avoid duplicating the type name
• Line 874: use auto when initializing with a cast to avoid duplicating the type name
• Line 887: use auto when initializing with new to avoid duplicating the type name
• Line 45: redundant access specifier has the same accessibility as the previous access specifier
• Line 68: redundant access specifier has the same accessibility as the previous access specifier
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated
• Line 50: redundant access specifier has the same accessibility as the previous access specifier
• Line 48: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaCommand.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 96: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 1112: Add #include for string

Warnings

• Line 98: use nullptr
• Line 16: nested namespaces can be concatenated
• Line 270: private field 'IsComposite' is not used
• Line 271: private field 'IsExclusive' is not used
• Line 272: private field 'IsDependent' is not used
• Line 273: private field 'RelationshipLowCc' is not used
• Line 274: private field 'RelationshipHighCc' is not used
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaCustomAttributeModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 23: Add #include for list<>

Warnings

• Line 17: Call to virtual method 'CustomAttributeModel::setupModel' during construction bypasses virtual dispatch
• Line 23: variable 'AttributeList' is not initialized

apps/SchemaEditor/SchemaCustomFileModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 112: Add #include for string

Warnings

• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaCustomMethodImplementationModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 21: Add #include for list<>

Warnings

• Line 15: Call to virtual method 'CustomMethodImplementationModel::setupModel' during construction bypasses virtual dispatch

apps/SchemaEditor/SchemaCustomMethodModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 50: If an else has a brace on one side, it should have it on both
• Line 22: Add #include for list<>
• Line 23: Add #include for string
• Line 23: Add #include for set<>

Warnings

• Line 16: Call to virtual method 'CustomMethodModel::setupModel' during construction bypasses virtual dispatch
• Line 22: variable 'MethodList' is not initialized

apps/SchemaEditor/SchemaCustomModelInterface.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 60: If an else has a brace on one side, it should have it on both
• Line 67: If an else has a brace on one side, it should have it on both

Warnings

• Line 62: the variable 'flag' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 69: the variable 'flag' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaCustomRelationshipModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 22: Add #include for list<>

Warnings

• Line 16: Call to virtual method 'CustomRelationshipModel::setupModel' during construction bypasses virtual dispatch
• Line 22: variable 'RelationshipList' is not initialized

apps/SchemaEditor/SchemaCustomSubClassModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 15: Call to virtual method 'CustomSubClassModel::setupModel' during construction bypasses virtual dispatch

apps/SchemaEditor/SchemaCustomSuperClassModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 55: If an else has a brace on one side, it should have it on both
• Line 48: Add #include for string
• Line 23: Add #include for set<>
• Line 31: Add #include for list<>

Warnings

• Line 16: Call to virtual method 'CustomSuperClassModel::setupModel' during construction bypasses virtual dispatch
• Line 43: loop variable is copied but only used as const reference; consider making it a const reference
• Line 48: loop variable is copied but only used as const reference; consider making it a const reference

apps/SchemaEditor/SchemaCustomTableModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 107: If an else has a brace on one side, it should have it on both
• Line 111: If an else has a brace on one side, it should have it on both
• Line 91: Add #include for vector<>

Warnings

• Line 104: unnecessary temporary object created while calling emplace_back
• Line 108: unnecessary temporary object created while calling emplace_back
• Line 112: unnecessary temporary object created while calling emplace_back
• Line 127: use auto when initializing with new to avoid duplicating the type name
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaFileInfo.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 36: If an else has a brace on one side, it should have it on both
• Line 84: If an else has a brace on one side, it should have it on both
• Line 114: If an else has a brace on one side, it should have it on both
• Line 118: If an else has a brace on one side, it should have it on both
• Line 199: "cout" should not be used for output in DUNE DAQ software.
• Line 320: If an else has a brace on one side, it should have it on both
• Line 356: If an else has a brace on one side, it should have it on both
• Line 364: If an else has a brace on one side, it should have it on both
• Line 368: If an else has a brace on one side, it should have it on both
• Line 376: If an else has a brace on one side, it should have it on both
• Line 400: "cout" should not be used for output in DUNE DAQ software.
• Line 426: "cout" should not be used for output in DUNE DAQ software.
• Line 512: If an else has a brace on one side, it should have it on both
• Line 522: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 582: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 546: Add #include for string
• Line 103: Add #include for set<>

Warnings

• Line 59: declaration uses identifier 'dbse__SchemaFileInfo', which is a reserved identifier
• Line 232: declaration uses identifier 'dbse__SchemaFileInfo', which is a reserved identifier
• Line 253: nested namespaces can be concatenated
• Line 106: loop variable is copied but only used as const reference; consider making it a const reference
• Line 219: use nullptr
• Line 235: use nullptr
• Line 248: use nullptr
• Line 340: use nullptr
• Line 391: loop variable is copied but only used as const reference; consider making it a const reference
• Line 402: loop variable is copied but only used as const reference; consider making it a const reference
• Line 435: use nullptr
• Line 445: use auto when initializing with new to avoid duplicating the type name
• Line 447: use auto when initializing with new to avoid duplicating the type name
• Line 452: use auto when initializing with new to avoid duplicating the type name
• Line 468: use auto when initializing with new to avoid duplicating the type name
• Line 471: use auto when initializing with new to avoid duplicating the type name
• Line 474: use auto when initializing with new to avoid duplicating the type name
• Line 477: use auto when initializing with new to avoid duplicating the type name
• Line 508: use nullptr
• Line 513: use nullptr
• Line 533: use nullptr
• Line 68: redundant access specifier has the same accessibility as the previous access specifier
• Line 16: nested namespaces can be concatenated
• Line 28: use nullptr
• Line 57: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaGraphicArrow.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 237: Small and focused functions are preferred: () has 108 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)

Warnings

• Line 104: default arguments on virtual or override methods are prohibited
• Line 16: nested namespaces can be concatenated
• Line 37: default arguments on virtual or override methods are prohibited
• Line 38: use nullptr
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 77: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaGraphicNote.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 42: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 65: Use of Run Time Type Information not allowed unless this code is meant to test other code

Warnings

• Line 75: result of integer division used in a floating point context; possible loss of precision
• Line 77: loop variable is copied but only used as const reference; consider making it a const reference
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 77: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: use nullptr
• Line 23: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaGraphicObject.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 11: Found other header after system header. Should be: SchemaGraphicObject.hh, other non-system headers, system headers.
• Line 13: Found other header after system header. Should be: SchemaGraphicObject.hh, other non-system headers, system headers.
• Line 356: If an else has a brace on one side, it should have it on both
• Line 362: If an else has a brace on one side, it should have it on both
• Line 455: Small and focused functions are preferred: () has 97 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 516: If an else has a brace on one side, it should have it on both
• Line 536: If/else bodies with multiple statements require braces
• Line 555: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 582: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 184: Add #include for string
• Line 170: Add #include for list<>
• Line 184: Add #include

Warnings

• Line 387: narrowing conversion from 'double' to 'int'
• Line 387: narrowing conversion from 'qreal' (aka 'double') to 'int'
• Line 387: narrowing conversion from 'double' to 'int'
• Line 413: narrowing conversion from 'double' to 'int'
• Line 413: narrowing conversion from 'qreal' (aka 'double') to 'int'
• Line 413: narrowing conversion from 'double' to 'int'
• Line 436: narrowing conversion from 'double' to 'int'
• Line 436: narrowing conversion from 'qreal' (aka 'double') to 'int'
• Line 436: narrowing conversion from 'double' to 'int'
• Line 555: use auto when initializing with a cast to avoid duplicating the type name
• Line 582: use auto when initializing with a cast to avoid duplicating the type name
• Line 68: redundant access specifier has the same accessibility as the previous access specifier
• Line 16: nested namespaces can be concatenated
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 29: default arguments on virtual or override methods are prohibited
• Line 30: use nullptr
• Line 77: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaGraphicSegmentedArrow.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 116: If an else has a brace on one side, it should have it on both
• Line 123: If an else has a brace on one side, it should have it on both
• Line 311: Small and focused functions are preferred: SchemaGraphicSegmentedArrow::UpdatePosition() has 168 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 102: Add #include for vector<>

Warnings

• Line 109: variable 'xoffset' is not initialized
• Line 110: variable 'yoffset' is not initialized
• Line 134: multiple declarations in a single statement reduces readability
• Line 135: multiple declarations in a single statement reduces readability
• Line 138: multiple declarations in a single statement reduces readability
• Line 163: potential uncovered code path; add a default label
• Line 342: narrowing conversion from 'typename __gnu_cxx::__promote_2::__type' (aka 'double') to 'float'
• Line 370: default arguments on virtual or override methods are prohibited
• Line 16: nested namespaces can be concatenated
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 29: default arguments on virtual or override methods are prohibited
• Line 30: use nullptr
• Line 57: private field 'LastDegree' is not used
• Line 58: private field 'LastRotation' is not used
• Line 77: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaGraphicsScene.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 239: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 241: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 243: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 259: If an else has a brace on one side, it should have it on both
• Line 263: If an else has a brace on one side, it should have it on both
• Line 286: "cout" should not be used for output in DUNE DAQ software.
• Line 317: If/else bodies with multiple statements require braces
• Line 346: If/else bodies with multiple statements require braces
• Line 361: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 379: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 518: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 576: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 581: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 733: Add #include for list<>
• Line 653: Add #include for string
• Line 307: Add #include

Warnings

• Line 291: use auto when initializing with new to avoid duplicating the type name
• Line 322: use auto when initializing with new to avoid duplicating the type name
• Line 324: narrowing conversion from 'mapped_type' (aka 'unsigned int') to signed type 'int' is implementation-defined
• Line 349: use auto when initializing with new to avoid duplicating the type name
• Line 352: narrowing conversion from 'mapped_type' (aka 'unsigned int') to signed type 'int' is implementation-defined
• Line 525: use auto when initializing with a template cast to avoid duplicating the type name
• Line 527: use auto when initializing with a template cast to avoid duplicating the type name
• Line 534: use auto when initializing with new to avoid duplicating the type name
• Line 548: use auto when initializing with new to avoid duplicating the type name
• Line 784: use auto when initializing with new to avoid duplicating the type name
• Line 68: redundant access specifier has the same accessibility as the previous access specifier
• Line 16: nested namespaces can be concatenated
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 29: default arguments on virtual or override methods are prohibited
• Line 30: use nullptr
• Line 77: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: nested namespaces can be concatenated
• Line 15: use nullptr
• Line 23: redundant access specifier has the same accessibility as the previous access specifier
• Line 48: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaKernelWrapper.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 43: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 54: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 71: If an else has a brace on one side, it should have it on both
• Line 102: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 126: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 392: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 853: Add #include for string
• Line 249: Add #include for vector<>
• Line 150: Add #include for set<>
• Line 254: Add #include for list<>

Warnings

• Line 42: use auto when declaring iterators
• Line 53: use auto when declaring iterators
• Line 101: use auto when declaring iterators
• Line 154: loop variable is copied but only used as const reference; consider making it a const reference
• Line 337: use nullptr
• Line 351: use nullptr
• Line 365: use nullptr
• Line 379: use nullptr
• Line 394: use nullptr
• Line 408: use nullptr
• Line 423: use nullptr
• Line 438: use nullptr
• Line 454: use nullptr
• Line 468: use nullptr
• Line 482: use nullptr
• Line 497: use nullptr
• Line 513: use nullptr
• Line 529: use nullptr
• Line 548: use nullptr
• Line 569: use nullptr
• Line 585: use nullptr
• Line 599: use nullptr
• Line 615: use nullptr
• Line 632: use nullptr
• Line 650: use nullptr
• Line 663: use nullptr
• Line 677: use nullptr
• Line 691: use nullptr
• Line 705: use nullptr
• Line 720: use nullptr
• Line 735: use nullptr
• Line 750: use nullptr
• Line 765: use nullptr
• Line 780: use nullptr
• Line 795: use nullptr
• Line 810: use nullptr
• Line 825: use nullptr
• Line 844: use nullptr
• Line 864: use nullptr
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated

apps/SchemaEditor/SchemaMainWindow.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 22: Found other header after system header. Should be: SchemaMainWindow.hh, other non-system headers, system headers.
• Line 194: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 224: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 241: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 253: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 338: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 373: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 491: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 508: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 685: If an else has a brace on one side, it should have it on both
• Line 786: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 816: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 824: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 836: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 875: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 882: If an else has a brace on one side, it should have it on both
• Line 883: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 920: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 923: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 952: If an else has a brace on one side, it should have it on both
• Line 999: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1011: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 1045: If an else has a brace on one side, it should have it on both
• Line 1049: If an else has a brace on one side, it should have it on both
• Line 1090: If an else has a brace on one side, it should have it on both
• Line 1095: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 722: Add #include for string
• Line 382: Add #include for set<>
• Line 591: Add #include for vector<>
• Line 1129: Add #include for move

Warnings

• Line 90: declaration uses identifier 'dbse__SchemaMainWindow', which is a reserved identifier
• Line 356: declaration uses identifier 'dbse__SchemaMainWindow', which is a reserved identifier
• Line 467: nested namespaces can be concatenated
• Line 100: use auto when initializing with new to avoid duplicating the type name
• Line 222: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 239: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 265: use nullptr
• Line 285: use nullptr
• Line 306: use nullptr
• Line 312: use nullptr
• Line 333: the variable 'class_name' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 349: use auto when initializing with new to avoid duplicating the type name
• Line 363: use nullptr
• Line 373: use auto when initializing with a cast to avoid duplicating the type name
• Line 399: use nullptr
• Line 416: use nullptr
• Line 435: use nullptr
• Line 449: use nullptr
• Line 466: variable 'status' is not initialized
• Line 491: use auto when initializing with a cast to avoid duplicating the type name
• Line 602: use nullptr
• Line 613: use nullptr
• Line 667: loop variable is copied but only used as const reference; consider making it a const reference
• Line 681: use nullptr
• Line 710: use nullptr
• Line 736: use nullptr
• Line 807: variable 'ok' is not initialized
• Line 816: use auto when initializing with a cast to avoid duplicating the type name
• Line 824: use auto when initializing with a cast to avoid duplicating the type name
• Line 836: use auto when initializing with a cast to avoid duplicating the type name
• Line 1002: use nullptr
• Line 1023: use auto when initializing with new to avoid duplicating the type name
• Line 1025: use auto when initializing with new to avoid duplicating the type name
• Line 1027: use auto when initializing with new to avoid duplicating the type name
• Line 1063: use auto when initializing with new to avoid duplicating the type name
• Line 1066: use auto when initializing with new to avoid duplicating the type name
• Line 1069: use auto when initializing with new to avoid duplicating the type name
• Line 68: redundant access specifier has the same accessibility as the previous access specifier
• Line 16: nested namespaces can be concatenated
• Line 28: use nullptr
• Line 57: redundant access specifier has the same accessibility as the previous access specifier
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 77: redundant access specifier has the same accessibility as the previous access specifier
• Line 15: nested namespaces can be concatenated
• Line 49: redundant access specifier has the same accessibility as the previous access specifier
• Line 48: redundant access specifier has the same accessibility as the previous access specifier
• Line 19: use nullptr
• Line 31: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaMethodEditor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 157: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 172: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 207: If an else has a brace on one side, it should have it on both
• Line 139: Add #include for string

Warnings

• Line 46: declaration uses identifier 'dbse__SchemaMethodEditor', which is a reserved identifier
• Line 187: declaration uses identifier 'dbse__SchemaMethodEditor', which is a reserved identifier
• Line 201: nested namespaces can be concatenated
• Line 156: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 171: use auto when initializing with a cast to avoid duplicating the type name
• Line 209: use nullptr
• Line 215: use auto when initializing with new to avoid duplicating the type name
• Line 229: use auto when initializing with new to avoid duplicating the type name
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated
• Line 50: redundant access specifier has the same accessibility as the previous access specifier
• Line 49: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaMethodImplementationEditor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 89: If an else has a brace on one side, it should have it on both
• Line 166: Add #include for string

Warnings

• Line 36: declaration uses identifier 'dbse__SchemaMethodImplementationEditor', which is a reserved identifier
• Line 152: declaration uses identifier 'dbse__SchemaMethodImplementationEditor', which is a reserved identifier
• Line 166: nested namespaces can be concatenated
• Line 151: use nullptr
• Line 159: use nullptr
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated
• Line 49: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaNoteEditor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 20: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer

Warnings

• Line 28: declaration uses identifier 'dbse__SchemaNoteEditor', which is a reserved identifier
• Line 60: declaration uses identifier 'dbse__SchemaNoteEditor', which is a reserved identifier
• Line 71: nested namespaces can be concatenated
• Line 15: use nullptr
• Line 23: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaRelationshipEditor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 191: If an else has a brace on one side, it should have it on both
• Line 328: Small and focused functions are preferred: dbse::SchemaRelationshipEditor::ParseToSave() has 107 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)

Warnings

• Line 62: declaration uses identifier 'dbse__SchemaRelationshipEditor', which is a reserved identifier
• Line 335: declaration uses identifier 'dbse__SchemaRelationshipEditor', which is a reserved identifier
• Line 372: nested namespaces can be concatenated
• Line 208: variable 'IsComposite' is not initialized
• Line 219: variable 'IsExclusive' is not initialized
• Line 230: variable 'IsDependent' is not initialized
• Line 241: variable 'RelationshipHighCardinality' is not initialized
• Line 242: variable 'RelationshipLowCardinality' is not initialized
• Line 334: use nullptr
• Line 343: variable 'IsComposite' is not initialized
• Line 354: variable 'IsExclusive' is not initialized
• Line 365: variable 'IsDependent' is not initialized
• Line 376: variable 'RelationshipHighCardinality' is not initialized
• Line 377: variable 'RelationshipLowCardinality' is not initialized
• Line 16: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated
• Line 48: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaSettings.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 19: loop variable is copied but only used as const reference; consider making it a const reference
• Line 28: the variable 'group' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 31: loop variable is copied but only used as const reference; consider making it a const reference
• Line 42: loop variable is copied but only used as const reference; consider making it a const reference
• Line 48: the variable 'group' is copy-constructed from a const reference but is only used as const reference; consider making it a const reference
• Line 19: use nullptr
• Line 31: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaEditor/SchemaStyle.cpp

Errors

• Line 0: The standard copyright message wasn't found.

apps/SchemaEditor/SchemaTab.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 49: If an else has a brace on one side, it should have it on both

Warnings

• Line 20: use auto when initializing with new to avoid duplicating the type name
• Line 46: 'itemChange' overrides a member function but is not marked 'override'
• Line 47: 'hoverEnterEvent' overrides a member function but is not marked 'override'
• Line 48: 'hoverLeaveEvent' overrides a member function but is not marked 'override'
• Line 49: 'mouseDoubleClickEvent' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 77: redundant access specifier has the same accessibility as the previous access specifier

apps/SchemaMain.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 30: "cerr" should not be used for output in DUNE DAQ software.
• Line 32: "cerr" should not be used for output in DUNE DAQ software.
• Line 34: "cerr" should not be used for output in DUNE DAQ software.
• Line 61: "cerr" should not be used for output in DUNE DAQ software.

Warnings

• Line 19: use nullptr
• Line 31: redundant access specifier has the same accessibility as the previous access specifier

apps/graphtool.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 116: Use operator || instead of or
• Line 143: Use operator ! instead of not
• Line 143: Use operator && instead of and
• Line 143: Use operator ! instead of not
• Line 181: "cerr" should not be used for output in DUNE DAQ software.
• Line 185: "cerr" should not be used for output in DUNE DAQ software.
• Line 190: Small and focused functions are preferred: () has 125 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 151: Add #include for string
• Line 38: Add #include for numeric_limits<>
• Line 133: Add #include for unique_ptr<>

Warnings

apps/graphtool/gtool.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 276: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 277: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 278: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 123: Use operator ! instead of not

Warnings

apps/graphtool/segregate.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 126: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 127: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 128: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 22: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 43: Use int16/int64/etc, rather than the C type long
• Line 70: Use int16/int64/etc, rather than the C type long
• Line 77: Use operator && instead of and
• Line 79: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 82: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 82: Add #include for string
• Line 68: Add #include for vector<>

Warnings

apps/graphtool/stats.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 22: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 23: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 24: C-style comment syntax detected; please use either C++ style "//" or Doxygen style

Warnings

• Line 15: nested namespaces can be concatenated
• Line 16: nested namespaces can be concatenated

include/dbe/BatchChangeWidget.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_BATCHCHANGEWIDGET_HPP_
• Line 68: #endif line should be "#endif // DBE_INCLUDE_DBE_BATCHCHANGEWIDGET_HPP_"
• Line 47: Add #include for vector<>

include/dbe/BuildingBlockEditors.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_BUILDINGBLOCKEDITORS_HPP_
• Line 437: #endif line should be "#endif // DBE_INCLUDE_DBE_BUILDINGBLOCKEDITORS_HPP_"
• Line 432: Namespace should be terminated with '// namespace widgets '
• Line 197: Add #include for string

include/dbe/Command.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 170: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_COMMAND_HPP_
• Line 206: #endif line should be "#endif // DBE_INCLUDE_DBE_COMMAND_HPP_"
• Line 46: Access specifier "protected:" appears after "private:", not before
• Line 47: Constructors callable with one argument should be marked explicit.
• Line 49: Access specifier "public:" appears after one (or both) of "private:" and/or "protected:", not before
• Line 76: Constructors callable with one argument should be marked explicit.
• Line 109: Constructors callable with one argument should be marked explicit.
• Line 192: Access specifier "public" has already appeared in class remove
• Line 197: Access specifier "private" has already appeared in class remove
• Line 199: Add #include for string
• Line 147: Add #include for vector<>

include/dbe/CommitDialog.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_COMMITDIALOG_HPP_
• Line 44: #endif line should be "#endif // DBE_INCLUDE_DBE_COMMITDIALOG_HPP_"
• Line 29: Constructors callable with one argument should be marked explicit.

include/dbe/Conversion.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONVERSION_HPP_
• Line 201: #endif line should be "#endif // DBE_INCLUDE_DBE_CONVERSION_HPP_"
• Line 198: Namespace should be terminated with '// namespace convert '
• Line 199: Namespace should be terminated with '// namespace dbe '

include/dbe/CreateDatabaseWidget.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CREATEDATABASEWIDGET_HPP_
• Line 51: #endif line should be "#endif // DBE_INCLUDE_DBE_CREATEDATABASEWIDGET_HPP_"
• Line 41: Add #include for string
• Line 40: Add #include for list<>

include/dbe/CustomDelegate.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CUSTOMDELEGATE_HPP_
• Line 49: #endif line should be "#endif // DBE_INCLUDE_DBE_CUSTOMDELEGATE_HPP_"

include/dbe/CustomFileView.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CUSTOMFILEVIEW_HPP_
• Line 60: #endif line should be "#endif // DBE_INCLUDE_DBE_CUSTOMFILEVIEW_HPP_"
• Line 22: Constructors callable with one argument should be marked explicit.

include/dbe/CustomLineEdit.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CUSTOMLINEEDIT_HPP_
• Line 59: #endif line should be "#endif // DBE_INCLUDE_DBE_CUSTOMLINEEDIT_HPP_"

include/dbe/CustomTableView.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CUSTOMTABLEVIEW_HPP_
• Line 75: #endif line should be "#endif // DBE_INCLUDE_DBE_CUSTOMTABLEVIEW_HPP_"

include/dbe/CustomTreeView.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CUSTOMTREEVIEW_HPP_
• Line 66: #endif line should be "#endif // DBE_INCLUDE_DBE_CUSTOMTREEVIEW_HPP_"

include/dbe/Exceptions.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 60: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 92: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_EXCEPTIONS_HPP_
• Line 93: #endif line should be "#endif // DBE_INCLUDE_DBE_EXCEPTIONS_HPP_"
• Line 90: Namespace should be terminated with '// namespace errors '
• Line 91: Namespace should be terminated with '// namespace config '

include/dbe/FileInfo.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_FILEINFO_HPP_
• Line 97: #endif line should be "#endif // DBE_INCLUDE_DBE_FILEINFO_HPP_"
• Line 27: Constructors callable with one argument should be marked explicit.

include/dbe/FileModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_FILEMODEL_HPP_
• Line 55: #endif line should be "#endif // DBE_INCLUDE_DBE_FILEMODEL_HPP_"

include/dbe/FilterTextEdit.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_FILTERTEXTEDIT_HPP_
• Line 107: #endif line should be "#endif // DBE_INCLUDE_DBE_FILTERTEXTEDIT_HPP_"
• Line 9: Found other header after system header. Should be: FilterTextEdit.hh, other non-system headers, system headers.
• Line 49: Single-parameter constructors should be marked explicit.
• Line 105: Namespace should be terminated with '// namespace QTUtils '
• Line 106: Namespace should be terminated with '// namespace daq '

include/dbe/GraphView.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_GRAPHVIEW_HPP_
• Line 62: #endif line should be "#endif // DBE_INCLUDE_DBE_GRAPHVIEW_HPP_"
• Line 14: Found other header after system header. Should be: GraphView.hh, other non-system headers, system headers.
• Line 18: Found other header after system header. Should be: GraphView.hh, other non-system headers, system headers.

include/dbe/GraphicalClass.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_GRAPHICALCLASS_HPP_
• Line 124: #endif line should be "#endif // DBE_INCLUDE_DBE_GRAPHICALCLASS_HPP_"
• Line 12: Found other header after system header. Should be: GraphicalClass.hh, other non-system headers, system headers.

include/dbe/IncludeFileWidget.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_INCLUDEFILEWIDGET_HPP_
• Line 58: #endif line should be "#endif // DBE_INCLUDE_DBE_INCLUDEFILEWIDGET_HPP_"
• Line 14: Found other header after system header. Should be: IncludeFileWidget.hh, other non-system headers, system headers.

include/dbe/MainWindow.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MAINWINDOW_HPP_
• Line 191: #endif line should be "#endif // DBE_INCLUDE_DBE_MAINWINDOW_HPP_"
• Line 25: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 26: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 28: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 29: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 30: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 31: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 32: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 33: Found other header after system header. Should be: MainWindow.hh, other non-system headers, system headers.
• Line 103: Access specifier "public" has already appeared in class MainWindow
• Line 105: Access specifier "private" has already appeared in class MainWindow
• Line 81: Add #include for vector<>
• Line 168: Add #include for string
• Line 168: Add #include for list<>

include/dbe/MyApplication.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MYAPPLICATION_HPP_
• Line 31: #endif line should be "#endif // DBE_INCLUDE_DBE_MYAPPLICATION_HPP_"

include/dbe/ObjectCreator.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_OBJECTCREATOR_HPP_
• Line 125: #endif line should be "#endif // DBE_INCLUDE_DBE_OBJECTCREATOR_HPP_"
• Line 42: Constructors callable with one argument should be marked explicit.
• Line 60: Constructors callable with one argument should be marked explicit.

include/dbe/ObjectEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_OBJECTEDITOR_HPP_
• Line 143: #endif line should be "#endif // DBE_INCLUDE_DBE_OBJECTEDITOR_HPP_"
• Line 39: Constructors callable with one argument should be marked explicit.
• Line 41: Constructors callable with one argument should be marked explicit.
• Line 138: Access specifier "private" has already appeared in class ObjectEditor
• Line 78: Add #include for string

include/dbe/OracleWidget.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_ORACLEWIDGET_HPP_
• Line 39: #endif line should be "#endif // DBE_INCLUDE_DBE_ORACLEWIDGET_HPP_"

include/dbe/Preferences.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_PREFERENCES_HPP_
• Line 33: #endif line should be "#endif // DBE_INCLUDE_DBE_PREFERENCES_HPP_"

include/dbe/SchemaAttributeEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAATTRIBUTEEDITOR_HPP_
• Line 53: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAATTRIBUTEEDITOR_HPP_"
• Line 11: Found other header after system header. Should be: SchemaAttributeEditor.hh, other non-system headers, system headers.
• Line 19: Namespace should be terminated with '// namespace Ui '
• Line 52: Namespace should be terminated with '// namespace dbse '

include/dbe/SchemaClassEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACLASSEDITOR_HPP_
• Line 103: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACLASSEDITOR_HPP_"
• Line 14: Found other header after system header. Should be: SchemaClassEditor.hh, other non-system headers, system headers.
• Line 16: Found other header after system header. Should be: SchemaClassEditor.hh, other non-system headers, system headers.
• Line 17: Found other header after system header. Should be: SchemaClassEditor.hh, other non-system headers, system headers.
• Line 18: Found other header after system header. Should be: SchemaClassEditor.hh, other non-system headers, system headers.
• Line 19: Found other header after system header. Should be: SchemaClassEditor.hh, other non-system headers, system headers.
• Line 20: Found other header after system header. Should be: SchemaClassEditor.hh, other non-system headers, system headers.

include/dbe/SchemaCommand.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACOMMAND_HPP_
• Line 593: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACOMMAND_HPP_"
• Line 11: Found other header after system header. Should be: SchemaCommand.hh, other non-system headers, system headers.
• Line 12: Found other header after system header. Should be: SchemaCommand.hh, other non-system headers, system headers.
• Line 13: Found other header after system header. Should be: SchemaCommand.hh, other non-system headers, system headers.
• Line 14: Found other header after system header. Should be: SchemaCommand.hh, other non-system headers, system headers.
• Line 19: Namespace should be terminated with '// namespace oks '
• Line 20: Namespace should be terminated with '// namespace dunedaq '
• Line 586: Add #include for string

include/dbe/SchemaCustomAttributeModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMATTRIBUTEMODEL_HPP_
• Line 29: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMATTRIBUTEMODEL_HPP_"

include/dbe/SchemaCustomFileModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMFILEMODEL_HPP_
• Line 35: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMFILEMODEL_HPP_"

include/dbe/SchemaCustomMethodImplementationModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMMETHODIMPLEMENTATIONMODEL_HPP_
• Line 28: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMMETHODIMPLEMENTATIONMODEL_HPP_"

include/dbe/SchemaCustomMethodModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMMETHODMODEL_HPP_
• Line 33: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMMETHODMODEL_HPP_"
• Line 12: Found other header after system header. Should be: SchemaCustomMethodModel.hh, other non-system headers, system headers.
• Line 14: Found other header after system header. Should be: SchemaCustomMethodModel.hh, other non-system headers, system headers.
• Line 15: Found other header after system header. Should be: SchemaCustomMethodModel.hh, other non-system headers, system headers.

include/dbe/SchemaCustomModelInterface.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMMODELINTERFACE_HPP_
• Line 35: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMMODELINTERFACE_HPP_"

include/dbe/SchemaCustomRelationshipModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMRELATIONSHIPMODEL_HPP_
• Line 30: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMRELATIONSHIPMODEL_HPP_"

include/dbe/SchemaCustomSubClassModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMSUBCLASSMODEL_HPP_
• Line 29: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMSUBCLASSMODEL_HPP_"

include/dbe/SchemaCustomSuperClassModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMSUPERCLASSMODEL_HPP_
• Line 30: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMSUPERCLASSMODEL_HPP_"

include/dbe/SchemaCustomTableModel.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMACUSTOMTABLEMODEL_HPP_
• Line 46: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMACUSTOMTABLEMODEL_HPP_"

include/dbe/SchemaFileInfo.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAFILEINFO_HPP_
• Line 80: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAFILEINFO_HPP_"
• Line 28: Constructors callable with one argument should be marked explicit.

include/dbe/SchemaGraphicArrow.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAGRAPHICARROW_HPP_
• Line 54: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAGRAPHICARROW_HPP_"
• Line 12: Found other header after system header. Should be: SchemaGraphicArrow.hh, other non-system headers, system headers.
• Line 13: Found other header after system header. Should be: SchemaGraphicArrow.hh, other non-system headers, system headers.

include/dbe/SchemaGraphicNote.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAGRAPHICNOTE_HPP_
• Line 42: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAGRAPHICNOTE_HPP_"

include/dbe/SchemaGraphicObject.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAGRAPHICOBJECT_HPP_
• Line 79: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAGRAPHICOBJECT_HPP_"
• Line 12: Found other header after system header. Should be: SchemaGraphicObject.hh, other non-system headers, system headers.
• Line 44: You don't need a ; after a }

include/dbe/SchemaGraphicSegmentedArrow.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAGRAPHICSEGMENTEDARROW_HPP_
• Line 63: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAGRAPHICSEGMENTEDARROW_HPP_"
• Line 7: Found other header after system header. Should be: SchemaGraphicSegmentedArrow.hh, other non-system headers, system headers.
• Line 8: Found other header after system header. Should be: SchemaGraphicSegmentedArrow.hh, other non-system headers, system headers.

include/dbe/SchemaGraphicsScene.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAGRAPHICSSCENE_HPP_
• Line 121: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAGRAPHICSSCENE_HPP_"
• Line 9: Found other header after system header. Should be: SchemaGraphicsScene.hh, other non-system headers, system headers.
• Line 10: Found other header after system header. Should be: SchemaGraphicsScene.hh, other non-system headers, system headers.
• Line 39: You don't need a ; after a }
• Line 40: You don't need a ; after a }
• Line 79: Add #include for set<>

include/dbe/SchemaKernelWrapper.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAKERNELWRAPPER_HPP_
• Line 160: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAKERNELWRAPPER_HPP_"
• Line 11: Found other header after system header. Should be: SchemaKernelWrapper.hh, other non-system headers, system headers.
• Line 13: Found other header after system header. Should be: SchemaKernelWrapper.hh, other non-system headers, system headers.
• Line 20: Namespace should be terminated with '// namespace oks '
• Line 21: Namespace should be terminated with '// namespace dunedaq '
• Line 147: Constructors callable with one argument should be marked explicit.
• Line 143: Add #include for string

include/dbe/SchemaMainWindow.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAMAINWINDOW_HPP_
• Line 117: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAMAINWINDOW_HPP_"
• Line 16: Found other header after system header. Should be: SchemaMainWindow.hh, other non-system headers, system headers.
• Line 17: Found other header after system header. Should be: SchemaMainWindow.hh, other non-system headers, system headers.
• Line 18: Found other header after system header. Should be: SchemaMainWindow.hh, other non-system headers, system headers.
• Line 71: Access specifier "protected:" appears after "private:", not before

include/dbe/SchemaMethodEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAMETHODEDITOR_HPP_
• Line 61: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAMETHODEDITOR_HPP_"
• Line 11: Found other header after system header. Should be: SchemaMethodEditor.hh, other non-system headers, system headers.
• Line 12: Found other header after system header. Should be: SchemaMethodEditor.hh, other non-system headers, system headers.
• Line 13: Found other header after system header. Should be: SchemaMethodEditor.hh, other non-system headers, system headers.

include/dbe/SchemaMethodImplementationEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMAMETHODIMPLEMENTATIONEDITOR_HPP_
• Line 58: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMAMETHODIMPLEMENTATIONEDITOR_HPP_"
• Line 11: Found other header after system header. Should be: SchemaMethodImplementationEditor.hh, other non-system headers, system headers.
• Line 12: Found other header after system header. Should be: SchemaMethodImplementationEditor.hh, other non-system headers, system headers.

include/dbe/SchemaNoteEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMANOTEEDITOR_HPP_
• Line 28: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMANOTEEDITOR_HPP_"
• Line 5: Found other header after system header. Should be: SchemaNoteEditor.hh, other non-system headers, system headers.
• Line 15: Constructors callable with one argument should be marked explicit.

include/dbe/SchemaRelationshipEditor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMARELATIONSHIPEDITOR_HPP_
• Line 59: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMARELATIONSHIPEDITOR_HPP_"
• Line 11: Found other header after system header. Should be: SchemaRelationshipEditor.hh, other non-system headers, system headers.

include/dbe/SchemaSettings.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMASETTINGS_HPP_
• Line 36: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMASETTINGS_HPP_"

include/dbe/SchemaStyle.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMASTYLE_HPP_
• Line 21: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMASTYLE_HPP_"

include/dbe/SchemaTab.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SCHEMATAB_HPP_
• Line 39: #endif line should be "#endif // DBE_INCLUDE_DBE_SCHEMATAB_HPP_"
• Line 13: Found other header after system header. Should be: SchemaTab.hh, other non-system headers, system headers.
• Line 28: You don't need a ; after a }

include/dbe/SearchComboBox.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SEARCHCOMBOBOX_HPP_
• Line 34: #endif line should be "#endif // DBE_INCLUDE_DBE_SEARCHCOMBOBOX_HPP_"

include/dbe/Sorting.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SORTING_HPP_
• Line 39: #endif line should be "#endif // DBE_INCLUDE_DBE_SORTING_HPP_"

include/dbe/StyleUtility.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_STYLEUTILITY_HPP_
• Line 45: #endif line should be "#endif // DBE_INCLUDE_DBE_STYLEUTILITY_HPP_"

include/dbe/TableNode.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TABLENODE_HPP_
• Line 50: #endif line should be "#endif // DBE_INCLUDE_DBE_TABLENODE_HPP_"
• Line 8: Found other header after system header. Should be: TableNode.hh, other non-system headers, system headers.
• Line 19: You don't need a ; after a }

include/dbe/TableTab.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TABLETAB_HPP_
• Line 61: #endif line should be "#endif // DBE_INCLUDE_DBE_TABLETAB_HPP_"
• Line 16: Found other header after system header. Should be: TableTab.hh, other non-system headers, system headers.
• Line 17: Found other header after system header. Should be: TableTab.hh, other non-system headers, system headers.
• Line 26: Constructors callable with one argument should be marked explicit.

include/dbe/TreeModelInterface.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TREEMODELINTERFACE_HPP_
• Line 63: #endif line should be "#endif // DBE_INCLUDE_DBE_TREEMODELINTERFACE_HPP_"
• Line 33: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 46: If/else bodies with multiple statements require braces

include/dbe/Validator.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_VALIDATOR_HPP_
• Line 35: #endif line should be "#endif // DBE_INCLUDE_DBE_VALIDATOR_HPP_"
• Line 18: Constructors callable with one argument should be marked explicit.
• Line 28: Constructors callable with one argument should be marked explicit.

include/dbe/ValidatorComboBox.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_VALIDATORCOMBOBOX_HPP_
• Line 40: #endif line should be "#endif // DBE_INCLUDE_DBE_VALIDATORCOMBOBOX_HPP_"

include/dbe/change_attribute.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 144: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CHANGE_ATTRIBUTE_HPP_
• Line 144: #endif line should be "#endif // DBE_INCLUDE_DBE_CHANGE_ATTRIBUTE_HPP_"
• Line 32: Found other header after system header. Should be: change_attribute.hh, other non-system headers, system headers.
• Line 142: Namespace should be terminated with '// namespace actions '
• Line 143: Namespace should be terminated with '// namespace dbe '

include/dbe/change_class.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CHANGE_CLASS_HPP_
• Line 135: #endif line should be "#endif // DBE_INCLUDE_DBE_CHANGE_CLASS_HPP_"
• Line 133: Namespace should be terminated with '// namespace actions '
• Line 134: Namespace should be terminated with '// namespace dbe '

include/dbe/change_date.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 134: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CHANGE_DATE_HPP_
• Line 134: #endif line should be "#endif // DBE_INCLUDE_DBE_CHANGE_DATE_HPP_"
• Line 132: Namespace should be terminated with '// namespace actions '
• Line 133: Namespace should be terminated with '// namespace dbe '

include/dbe/change_enum.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 140: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CHANGE_ENUM_HPP_
• Line 140: #endif line should be "#endif // DBE_INCLUDE_DBE_CHANGE_ENUM_HPP_"
• Line 138: Namespace should be terminated with '// namespace actions '

include/dbe/change_time.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 137: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CHANGE_TIME_HPP_
• Line 137: #endif line should be "#endif // DBE_INCLUDE_DBE_CHANGE_TIME_HPP_"
• Line 134: Namespace should be terminated with '// namespace actions '
• Line 135: Namespace should be terminated with '// namespace dbe '

include/dbe/confaccessor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFACCESSOR_HPP_
• Line 291: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFACCESSOR_HPP_"
• Line 271: Add #include for vector<>
• Line 220: Add #include for list<>
• Line 244: Add #include for shared_ptr<>

include/dbe/config_api.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 291: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 292: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 293: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 295: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_HPP_
• Line 295: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_HPP_"
• Line 51: Use operator ! instead of not
• Line 58: Namespace should be terminated with '// namespace info '
• Line 108: Namespace should be terminated with '// namespace get '
• Line 151: Namespace should be terminated with '// namespace commands '
• Line 161: Use operator ! instead of not
• Line 188: Use operator ! instead of not
• Line 215: Use operator ! instead of not
• Line 242: Use operator ! instead of not
• Line 270: Use operator ! instead of not
• Line 290: Namespace should be terminated with '// namespace api '
• Line 150: Add #include for string
• Line 150: Add #include for vector<>

include/dbe/config_api_commands.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 41: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 137: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_COMMANDS_HPP_
• Line 137: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_COMMANDS_HPP_"
• Line 127: Namespace should be terminated with '// namespace file '
• Line 129: Namespace should be terminated with '// namespace commands '
• Line 133: Namespace should be terminated with '// namespace api '
• Line 134: Namespace should be terminated with '// namespace config '
• Line 135: Namespace should be terminated with '// namespace dbe '

include/dbe/config_api_get.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 33: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 34: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 35: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 46: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 139: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 140: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 141: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 143: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_GET_HPP_
• Line 143: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_GET_HPP_"
• Line 123: Namespace should be terminated with '// namespace defaults '
• Line 136: Namespace should be terminated with '// namespace get '

include/dbe/config_api_graph.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 29: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 30: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 187: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 188: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 189: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 192: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_GRAPH_HPP_
• Line 192: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_GRAPH_HPP_"
• Line 39: Namespace should be terminated with '// namespace config '
• Line 40: Namespace should be terminated with '// namespace ui '
• Line 41: Namespace should be terminated with '// namespace dbe '
• Line 75: Namespace should be terminated with '// namespace to '
• Line 92: Namespace should be terminated with '// namespace by '
• Line 144: Namespace should be terminated with '// namespace through '
• Line 147: Namespace should be terminated with '// namespace linked '

include/dbe/config_api_info.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 30: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 31: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 125: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_INFO_HPP_
• Line 125: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_INFO_HPP_"
• Line 31: Namespace should be terminated with '// namespace dunedaq '
• Line 78: Namespace should be terminated with '// namespace relation '
• Line 120: Namespace should be terminated with '// namespace api '
• Line 121: Namespace should be terminated with '// namespace config '
• Line 122: Namespace should be terminated with '// namespace dbe '

include/dbe/config_api_set.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 31: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 32: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 46: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 82: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 22: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_SET_HPP_
• Line 159: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_SET_HPP_"
• Line 152: Namespace should be terminated with '// namespace noactions '

include/dbe/config_api_version.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 13: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 8: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_API_VERSION_HPP_
• Line 13: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_API_VERSION_HPP_"

include/dbe/config_direct_access.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 108: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_DIRECT_ACCESS_HPP_
• Line 108: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_DIRECT_ACCESS_HPP_"
• Line 44: Add #include for vector<>

include/dbe/config_object_key.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 55: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_OBJECT_KEY_HPP_
• Line 55: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_OBJECT_KEY_HPP_"
• Line 49: Use operator && instead of and

include/dbe/config_reference.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 341: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 343: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 344: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 345: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 529: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_REFERENCE_HPP_
• Line 529: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_REFERENCE_HPP_"
• Line 24: Use of NULL #define found; prefer using the nullptr keyword
• Line 25: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 25: Use of NULL #define found; prefer using the nullptr keyword
• Line 26: Use operator && instead of and
• Line 29: Use of NULL #define found; prefer using the nullptr keyword
• Line 50: Single-parameter constructors should be marked explicit.
• Line 90: Single-parameter constructors should be marked explicit.
• Line 144: Access specifier "public:" appears after one (or both) of "private:" and/or "protected:", not before
• Line 145: Single-parameter constructors should be marked explicit.
• Line 166: Access specifier "protected:" appears after "private:", not before
• Line 182: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 182: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 182: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 189: Access specifier "public:" appears after one (or both) of "private:" and/or "protected:", not before
• Line 254: If an else has a brace on one side, it should have it on both
• Line 264: Are you taking an address of a cast? This is dangerous: could be a temp var. Take the address before doing the cast, rather than after
• Line 276: Are you taking an address of a cast? This is dangerous: could be a temp var. Take the address before doing the cast, rather than after
• Line 365: Access specifier "private" has already appeared in class authorized_getter
• Line 368: Access specifier "public" has already appeared in class authorized_getter
• Line 369: Single-parameter constructors should be marked explicit.
• Line 383: Access specifier "private" has already appeared in class authorized_getter
• Line 386: Access specifier "public" has already appeared in class authorized_getter
• Line 387: Single-parameter constructors should be marked explicit.
• Line 401: Access specifier "private" has already appeared in class authorized_getter
• Line 404: Access specifier "public" has already appeared in class authorized_getter
• Line 405: Single-parameter constructors should be marked explicit.
• Line 419: Access specifier "private" has already appeared in class authorized_getter
• Line 422: Access specifier "public" has already appeared in class authorized_getter
• Line 423: Single-parameter constructors should be marked explicit.
• Line 464: Use of NULL #define found; prefer using the nullptr keyword
• Line 468: Single-parameter constructors should be marked explicit.
• Line 494: Use of NULL #define found; prefer using the nullptr keyword
• Line 498: Single-parameter constructors should be marked explicit.
• Line 521: Use operator && instead of and
• Line 525: Namespace should be terminated with '// namespace configobject '
• Line 526: Namespace should be terminated with '// namespace inner '
• Line 527: Namespace should be terminated with '// namespace dbe '
• Line 449: Add #include for string
• Line 273: Add #include for transform
• Line 332: Add #include for move

include/dbe/config_reference_copy.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 133: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_REFERENCE_COPY_HPP_
• Line 133: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_REFERENCE_COPY_HPP_"
• Line 95: Add #include for deque<>
• Line 96: Add #include for vector<>

include/dbe/config_ui_info.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 60: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 61: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 62: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 64: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFIG_UI_INFO_HPP_
• Line 64: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFIG_UI_INFO_HPP_"
• Line 39: Single-parameter constructors should be marked explicit.

include/dbe/confobject_desc.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 207: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFOBJECT_DESC_HPP_
• Line 207: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFOBJECT_DESC_HPP_"
• Line 52: Access specifier "public:" appears after one (or both) of "private:" and/or "protected:", not before
• Line 53: Single-parameter constructors should be marked explicit.
• Line 94: Use operator ! instead of not
• Line 171: Add #include for pair<>

include/dbe/confobject_extra.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 153: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONFOBJECT_EXTRA_HPP_
• Line 153: #endif line should be "#endif // DBE_INCLUDE_DBE_CONFOBJECT_EXTRA_HPP_"
• Line 82: Use operator ! instead of not
• Line 105: Single-parameter constructors should be marked explicit.
• Line 134: Single-parameter constructors should be marked explicit.

include/dbe/convenience.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 22: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 29: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 19: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CONVENIENCE_HPP_
• Line 127: #endif line should be "#endif // DBE_INCLUDE_DBE_CONVENIENCE_HPP_"
• Line 64: Using C-style cast. Use one of the C++ cast operators instead
• Line 88: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 97: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 97: Use of NULL #define found; prefer using the nullptr keyword
• Line 120: Use of Run Time Type Information not allowed unless this code is meant to test other code

include/dbe/cptr.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 137: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 18: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_CPTR_HPP_
• Line 137: #endif line should be "#endif // DBE_INCLUDE_DBE_CPTR_HPP_"
• Line 118: Access specifier "public:" appears after one (or both) of "private:" and/or "protected:", not before
• Line 119: Single-parameter constructors should be marked explicit.

include/dbe/datahandler.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_DATAHANDLER_HPP_
• Line 91: #endif line should be "#endif // DBE_INCLUDE_DBE_DATAHANDLER_HPP_"
• Line 25: Namespace should be terminated with '// namespace models '
• Line 75: Add #include for string

include/dbe/dbaccessor.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 83: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_DBACCESSOR_HPP_
• Line 83: #endif line should be "#endif // DBE_INCLUDE_DBE_DBACCESSOR_HPP_"
• Line 34: Namespace should be terminated with '// namespace info '
• Line 39: Namespace should be terminated with '// namespace get '
• Line 41: Namespace should be terminated with '// namespace api '

include/dbe/dbcontroller.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 202: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_DBCONTROLLER_HPP_
• Line 202: #endif line should be "#endif // DBE_INCLUDE_DBE_DBCONTROLLER_HPP_"

include/dbe/dbinfo.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 28: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_DBINFO_HPP_
• Line 28: #endif line should be "#endif // DBE_INCLUDE_DBE_DBINFO_HPP_"
• Line 26: Namespace should be terminated with '// namespace dbe '

include/dbe/graphtool.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 27: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 17: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_GRAPHTOOL_HPP_
• Line 27: #endif line should be "#endif // DBE_INCLUDE_DBE_GRAPHTOOL_HPP_"
• Line 21: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 23: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 24: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 25: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)

include/dbe/gtool.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 189: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 190: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 191: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 193: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_GTOOL_HPP_
• Line 193: #endif line should be "#endif // DBE_INCLUDE_DBE_GTOOL_HPP_"
• Line 148: Single-parameter constructors should be marked explicit.
• Line 60: Add #include
• Line 114: Add #include for pair<>

include/dbe/highlighter.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_HIGHLIGHTER_HPP_
• Line 93: #endif line should be "#endif // DBE_INCLUDE_DBE_HIGHLIGHTER_HPP_"
• Line 34: Constructors callable with one argument should be marked explicit.
• Line 91: Namespace should be terminated with '// namespace QTUtils '
• Line 92: Namespace should be terminated with '// namespace daq '

include/dbe/macro.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 178: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 19: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MACRO_HPP_
• Line 178: #endif line should be "#endif // DBE_INCLUDE_DBE_MACRO_HPP_"
• Line 23: Found other header after system header. Should be: macro.hh, other non-system headers, system headers.
• Line 32: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 34: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 35: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 41: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 42: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 43: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 49: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 49: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 55: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 55: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 62: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 63: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 64: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 65: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 81: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 96: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 103: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 113: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 120: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 130: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 136: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 146: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 152: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 161: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 167: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 168: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 170: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 171: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 173: #define appears to be used. Macros should generally be avoided if there's an alternative to them.

include/dbe/messenger.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 235: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 236: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 237: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 239: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MESSENGER_HPP_
• Line 239: #endif line should be "#endif // DBE_INCLUDE_DBE_MESSENGER_HPP_"
• Line 27: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 31: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 34: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 36: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 39: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 40: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 41: static storage declaration outside of class or function not allowed (if this isn't a header, please contact John Freeman)
• Line 45: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 51: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 57: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 64: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 71: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 78: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 79: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 80: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 81: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 82: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 83: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 85: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 87: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 88: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 89: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 90: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 91: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 93: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 95: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 96: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 97: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 98: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 99: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 101: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 103: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 104: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 105: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 106: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 108: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 110: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 111: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 112: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 113: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 117: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 123: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 128: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 129: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 130: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 131: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 133: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 135: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 136: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 137: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 138: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 170: Add #include for vector<>

include/dbe/messenger_proxy.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 43: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 66: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MESSENGER_PROXY_HPP_
• Line 66: #endif line should be "#endif // DBE_INCLUDE_DBE_MESSENGER_PROXY_HPP_"
• Line 63: Namespace should be terminated with '// namespace interface '
• Line 64: Namespace should be terminated with '// namespace dbe '
• Line 32: Add #include for string

include/dbe/model_common_interface.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 299: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MODEL_COMMON_INTERFACE_HPP_
• Line 299: #endif line should be "#endif // DBE_INCLUDE_DBE_MODEL_COMMON_INTERFACE_HPP_"
• Line 26: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 27: #define appears to be used. Macros should generally be avoided if there's an alternative to them.

include/dbe/model_common_interface_macros.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 94: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 180: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MODEL_COMMON_INTERFACE_MACROS_HPP_
• Line 180: #endif line should be "#endif // DBE_INCLUDE_DBE_MODEL_COMMON_INTERFACE_MACROS_HPP_"
• Line 30: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 59: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 75: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 80: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 83: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 86: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 89: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 103: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 110: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 117: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 125: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 133: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 145: #define appears to be used. Macros should generally be avoided if there's an alternative to them.

include/dbe/model_common_operations.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 241: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MODEL_COMMON_OPERATIONS_HPP_
• Line 241: #endif line should be "#endif // DBE_INCLUDE_DBE_MODEL_COMMON_OPERATIONS_HPP_"
• Line 117: Use operator ! instead of not
• Line 167: Use operator && instead of and
• Line 207: Use operator && instead of and
• Line 208: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 162: Add #include for vector<>
• Line 161: Add #include for set<>

include/dbe/msghandler.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 167: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 168: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 172: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 19: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_MSGHANDLER_HPP_
• Line 172: #endif line should be "#endif // DBE_INCLUDE_DBE_MSGHANDLER_HPP_"
• Line 31: Found other header after system header. Should be: msghandler.hh, other non-system headers, system headers.
• Line 166: Namespace should be terminated with '// namespace program '
• Line 100: Add #include for pair<>

include/dbe/qdebugstream.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 63: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 1: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_QDEBUGSTREAM_HPP_
• Line 63: #endif line should be "#endif // DBE_INCLUDE_DBE_QDEBUGSTREAM_HPP_"
• Line 7: Found other header after system header. Should be: qdebugstream.hh, other non-system headers, system headers.
• Line 46: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 61: Namespace should be terminated with '// namespace QTUtils '
• Line 62: Namespace should be terminated with '// namespace daq '

include/dbe/segregate.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 48: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 49: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 50: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 52: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SEGREGATE_HPP_
• Line 52: #endif line should be "#endif // DBE_INCLUDE_DBE_SEGREGATE_HPP_"
• Line 43: Add #include for string

include/dbe/stats.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 27: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 28: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 29: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 31: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_STATS_HPP_
• Line 31: #endif line should be "#endif // DBE_INCLUDE_DBE_STATS_HPP_"

include/dbe/string_attr_text_edit.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_STRING_ATTR_TEXT_EDIT_HPP_
• Line 59: #endif line should be "#endif // DBE_INCLUDE_DBE_STRING_ATTR_TEXT_EDIT_HPP_"

include/dbe/subtreeproxy.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_SUBTREEPROXY_HPP_
• Line 79: #endif line should be "#endif // DBE_INCLUDE_DBE_SUBTREEPROXY_HPP_"
• Line 14: Found other header after system header. Should be: subtreeproxy.hh, other non-system headers, system headers.
• Line 15: Found other header after system header. Should be: subtreeproxy.hh, other non-system headers, system headers.
• Line 18: Found other header after system header. Should be: subtreeproxy.hh, other non-system headers, system headers.
• Line 76: Namespace should be terminated with '// namespace models '

include/dbe/table.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TABLE_HPP_
• Line 114: #endif line should be "#endif // DBE_INCLUDE_DBE_TABLE_HPP_"
• Line 111: Namespace should be terminated with '// namespace models '
• Line 72: Add #include for vector<>

include/dbe/tableselection.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TABLESELECTION_HPP_
• Line 69: #endif line should be "#endif // DBE_INCLUDE_DBE_TABLESELECTION_HPP_"
• Line 14: Found other header after system header. Should be: tableselection.hh, other non-system headers, system headers.
• Line 15: Found other header after system header. Should be: tableselection.hh, other non-system headers, system headers.
• Line 40: Constructors callable with one argument should be marked explicit.
• Line 66: Namespace should be terminated with '// namespace models '

include/dbe/tree.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TREE_HPP_
• Line 105: #endif line should be "#endif // DBE_INCLUDE_DBE_TREE_HPP_"
• Line 12: Found other header after system header. Should be: tree.hh, other non-system headers, system headers.
• Line 14: Found other header after system header. Should be: tree.hh, other non-system headers, system headers.
• Line 15: Found other header after system header. Should be: tree.hh, other non-system headers, system headers.
• Line 102: Namespace should be terminated with '// namespace models '
• Line 85: Add #include for vector<>

include/dbe/treenode.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TREENODE_HPP_
• Line 118: #endif line should be "#endif // DBE_INCLUDE_DBE_TREENODE_HPP_"
• Line 22: Constructors callable with one argument should be marked explicit.
• Line 23: Constructors callable with one argument should be marked explicit.
• Line 24: Constructors callable with one argument should be marked explicit.
• Line 70: You don't need a ; after a }

include/dbe/treeselection.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TREESELECTION_HPP_
• Line 99: #endif line should be "#endif // DBE_INCLUDE_DBE_TREESELECTION_HPP_"
• Line 96: Namespace should be terminated with '// namespace models '
• Line 87: Add #include for vector<>

include/dbe/tref.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 42: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TREF_HPP_
• Line 42: #endif line should be "#endif // DBE_INCLUDE_DBE_TREF_HPP_"
• Line 32: Namespace should be terminated with '// namespace configobject '
• Line 33: Namespace should be terminated with '// namespace inner '

include/dbe/types.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 32: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_TYPES_HPP_
• Line 32: #endif line should be "#endif // DBE_INCLUDE_DBE_TYPES_HPP_"
• Line 28: Namespace should be terminated with '// namespace common '
• Line 29: Namespace should be terminated with '// namespace types '
• Line 30: Namespace should be terminated with '// namespace dbe '

include/dbe/ui_constants.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_UI_CONSTANTS_HPP_
• Line 14: #endif line should be "#endif // DBE_INCLUDE_DBE_UI_CONSTANTS_HPP_"

include/dbe/version.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 32: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_VERSION_HPP_
• Line 32: #endif line should be "#endif // DBE_INCLUDE_DBE_VERSION_HPP_"
• Line 16: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 17: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 20: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 22: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 26: #define appears to be used. Macros should generally be avoided if there's an alternative to them.
• Line 28: #define appears to be used. Macros should generally be avoided if there's an alternative to them.

include/dbe/view_common_interface.hpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 18: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 35: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 13: #ifndef header guard has wrong style, please use: DBE_INCLUDE_DBE_VIEW_COMMON_INTERFACE_HPP_
• Line 35: #endif line should be "#endif // DBE_INCLUDE_DBE_VIEW_COMMON_INTERFACE_HPP_"

src/MyApplication.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 42: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 43: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 46: An exception appears to be getting caught here, but not via a reference.
• Line 52: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()

Warnings

src/TableTab.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 37: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 42: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 43: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 44: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 45: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 89: Use of NULL #define found; prefer using the nullptr keyword
• Line 105: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 105: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 105: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 139: Use operator ! instead of not

Warnings

• Line 115: declaration uses identifier 'dbe__MainWindow', which is a reserved identifier
• Line 498: declaration uses identifier 'dbe__MainWindow', which is a reserved identifier
• Line 653: nested namespaces can be concatenated
• Line 20: use nullptr
• Line 45: redundant access specifier has the same accessibility as the previous access specifier
• Line 30: use nullptr
• Line 49: redundant access specifier has the same accessibility as the previous access specifier
• Line 28: 'contextMenuEvent' overrides a member function but is not marked 'override'
• Line 34: 'slot_delete_objects' overrides a member function but is not marked 'override'
• Line 35: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 36: 'slot_edit_object' overrides a member function but is not marked 'override'
• Line 37: 'slot_copy_object' overrides a member function but is not marked 'override'
• Line 62: nested namespaces can be concatenated
• Line 30: default arguments on virtual or override methods are prohibited
• Line 32: default arguments on virtual or override methods are prohibited
• Line 60: use nullptr
• Line 104: use nullptr
• Line 120: redundant access specifier has the same accessibility as the previous access specifier
• Line 19: use nullptr
• Line 25: redundant access specifier has the same accessibility as the previous access specifier
• Line 26: use nullptr
• Line 33: function-like macro 'TREEMODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 30: nested namespaces can be concatenated
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 19: function-like macro 'MODEL_COMMON_INTERFACE_TYPES' used; consider a 'constexpr' template function
• Line 30: function-like macro 'MODEL_COMMON_IMPL_REQ_DEF' used; consider a 'constexpr' template function
• Line 59: function-like macro 'MODEL_COMMON_INTERFACE_REQ_DEF' used; consider a 'constexpr' template function
• Line 75: function-like macro 'MODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 80: function-like macro 'MODEL_DELETE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 83: function-like macro 'MODEL_CREATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 86: function-like macro 'MODEL_UPDATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 89: function-like macro 'MODEL_RENAME_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 103: function-like macro 'MODEL_COMMON_INTERFACE_LOOKUP_IMPL' used; consider a 'constexpr' template function
• Line 110: function-like macro 'MODEL_COMMON_INTERFACE_DELETE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 117: function-like macro 'MODEL_COMMON_INTERFACE_CREATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 125: function-like macro 'MODEL_COMMON_INTERFACE_RENAME_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 133: function-like macro 'MODEL_COMMON_INTERFACE_UPDATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 145: function-like macro 'MODEL_COMMON_INTERFACE_SLOTS_DEF' used; consider a 'constexpr' template function
• Line 165: use auto when declaring iterators
• Line 200: use auto when declaring iterators
• Line 20: nested namespaces can be concatenated
• Line 48: 'getnode' overrides a member function but is not marked 'override'
• Line 52: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 54: 'lessThan' overrides a member function but is not marked 'override'
• Line 69: redundant access specifier has the same accessibility as the previous access specifier
• Line 70: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 71: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 72: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 73: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 19: nested namespaces can be concatenated
• Line 102: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 103: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 104: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 105: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 17: nested namespaces can be concatenated
• Line 40: use nullptr
• Line 46: 'setData' overrides a member function but is not marked 'override'
• Line 51: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 53: 'lessThan' overrides a member function but is not marked 'override'
• Line 59: redundant access specifier has the same accessibility as the previous access specifier
• Line 60: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 61: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 62: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 63: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 59: default arguments on virtual or override methods are prohibited
• Line 61: default arguments on virtual or override methods are prohibited
• Line 93: redundant access specifier has the same accessibility as the previous access specifier
• Line 96: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 97: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 98: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 99: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 19: nested namespaces can be concatenated
• Line 45: use nullptr
• Line 50: 'fetchMore' overrides a member function but is not marked 'override'
• Line 52: 'hasChildren' overrides a member function but is not marked 'override'
• Line 54: 'canFetchMore' overrides a member function but is not marked 'override'
• Line 66: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 68: 'lessThan' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 89: redundant access specifier has the same accessibility as the previous access specifier
• Line 90: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 91: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 92: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 93: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 24: nested namespaces can be concatenated
• Line 33: use auto when initializing with new to avoid duplicating the type name
• Line 89: use nullptr

src/graphical/GraphView.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 133: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 204: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 323: Add #include for vector<>

Warnings

• Line 115: declaration uses identifier 'dbe__MainWindow', which is a reserved identifier
• Line 498: declaration uses identifier 'dbe__MainWindow', which is a reserved identifier
• Line 653: nested namespaces can be concatenated
• Line 26: declaration uses identifier 'dbe__EditCombo', which is a reserved identifier
• Line 55: declaration uses identifier 'dbe__EditCombo', which is a reserved identifier
• Line 64: nested namespaces can be concatenated
• Line 30: declaration uses identifier 'dbe__NumericAttributeWidgetForm', which is a reserved identifier
• Line 76: declaration uses identifier 'dbe__NumericAttributeWidgetForm', which is a reserved identifier
• Line 90: nested namespaces can be concatenated
• Line 33: declaration uses identifier 'dbe__RelationshipForm', which is a reserved identifier
• Line 98: declaration uses identifier 'dbe__RelationshipForm', which is a reserved identifier
• Line 109: nested namespaces can be concatenated
• Line 30: declaration uses identifier 'dbe__StringAttributeWidgetForm', which is a reserved identifier
• Line 79: declaration uses identifier 'dbe__StringAttributeWidgetForm', which is a reserved identifier
• Line 90: nested namespaces can be concatenated
• Line 112: nested namespaces can be concatenated
• Line 186: 'eventFilter' overrides a member function but is not marked 'override'
• Line 216: redundant access specifier has the same accessibility as the previous access specifier
• Line 222: 'closeEvent' overrides a member function but is not marked 'override'
• Line 265: 'eventFilter' overrides a member function but is not marked 'override'
• Line 270: 'closeEvent' overrides a member function but is not marked 'override'
• Line 272: 'setdefaults' overrides a member function but is not marked 'override'
• Line 315: 'setdefaults' overrides a member function but is not marked 'override'
• Line 319: 'closeEvent' overrides a member function but is not marked 'override'
• Line 365: 'setdata' overrides a member function but is not marked 'override'
• Line 371: 'eventFilter' overrides a member function but is not marked 'override'
• Line 372: 'wheelEvent' overrides a member function but is not marked 'override'
• Line 377: redundant access specifier has the same accessibility as the previous access specifier
• Line 402: 'buildtooltip' overrides a member function but is not marked 'override'
• Line 403: 'closeEvent' overrides a member function but is not marked 'override'
• Line 405: 'eventFilter' overrides a member function but is not marked 'override'
• Line 418: redundant access specifier has the same accessibility as the previous access specifier
• Line 20: use nullptr
• Line 45: redundant access specifier has the same accessibility as the previous access specifier
• Line 18: use nullptr
• Line 30: use nullptr
• Line 49: redundant access specifier has the same accessibility as the previous access specifier
• Line 62: nested namespaces can be concatenated
• Line 30: default arguments on virtual or override methods are prohibited
• Line 32: default arguments on virtual or override methods are prohibited
• Line 49: redundant access specifier has the same accessibility as the previous access specifier
• Line 60: use nullptr
• Line 104: use nullptr
• Line 120: redundant access specifier has the same accessibility as the previous access specifier
• Line 42: use nullptr
• Line 52: use nullptr
• Line 60: use nullptr
• Line 19: use nullptr
• Line 25: redundant access specifier has the same accessibility as the previous access specifier
• Line 26: use nullptr
• Line 33: function-like macro 'TREEMODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 30: nested namespaces can be concatenated
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 25: nested namespaces can be concatenated
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 19: function-like macro 'MODEL_COMMON_INTERFACE_TYPES' used; consider a 'constexpr' template function
• Line 30: function-like macro 'MODEL_COMMON_IMPL_REQ_DEF' used; consider a 'constexpr' template function
• Line 59: function-like macro 'MODEL_COMMON_INTERFACE_REQ_DEF' used; consider a 'constexpr' template function
• Line 75: function-like macro 'MODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 80: function-like macro 'MODEL_DELETE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 83: function-like macro 'MODEL_CREATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 86: function-like macro 'MODEL_UPDATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 89: function-like macro 'MODEL_RENAME_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 103: function-like macro 'MODEL_COMMON_INTERFACE_LOOKUP_IMPL' used; consider a 'constexpr' template function
• Line 110: function-like macro 'MODEL_COMMON_INTERFACE_DELETE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 117: function-like macro 'MODEL_COMMON_INTERFACE_CREATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 125: function-like macro 'MODEL_COMMON_INTERFACE_RENAME_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 133: function-like macro 'MODEL_COMMON_INTERFACE_UPDATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 145: function-like macro 'MODEL_COMMON_INTERFACE_SLOTS_DEF' used; consider a 'constexpr' template function
• Line 163: variable 'to_remove_objects' is not initialized
• Line 178: variable 'removed_objects' is not initialized
• Line 188: variable 'to_remove_rows' is not initialized
• Line 18: use nullptr
• Line 20: nested namespaces can be concatenated
• Line 69: redundant access specifier has the same accessibility as the previous access specifier
• Line 19: nested namespaces can be concatenated
• Line 17: nested namespaces can be concatenated
• Line 40: use nullptr
• Line 59: redundant access specifier has the same accessibility as the previous access specifier
• Line 59: default arguments on virtual or override methods are prohibited
• Line 61: default arguments on virtual or override methods are prohibited
• Line 93: redundant access specifier has the same accessibility as the previous access specifier
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: default arguments on virtual or override methods are prohibited
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 19: nested namespaces can be concatenated
• Line 45: use nullptr
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 89: redundant access specifier has the same accessibility as the previous access specifier
• Line 24: nested namespaces can be concatenated
• Line 36: variable 'scene' is not initialized
• Line 129: variable 'Index' is not initialized
• Line 314: variable 'ChooseDialog' is not initialized
• Line 315: use auto when initializing with new to avoid duplicating the type name
• Line 316: use auto when initializing with new to avoid duplicating the type name
• Line 317: use auto when initializing with new to avoid duplicating the type name
• Line 318: use auto when initializing with new to avoid duplicating the type name

src/graphical/GraphicalClass.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 70: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 71: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 280: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 282: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 349: Small and focused functions are preferred: () has 136 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 365: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 418: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 445: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 456: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 506: Small and focused functions are preferred: dbe::GraphicalObject::ShowGraphicsChildren() has 90 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 530: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 566: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 577: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 623: Small and focused functions are preferred: dbe::GraphicalObject::HideGraphicsChildren() has 87 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 737: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 805: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 292: Add #include for vector<>
• Line 809: Add #include for string

Warnings

• Line 62: nested namespaces can be concatenated
• Line 60: use nullptr
• Line 104: use nullptr
• Line 30: nested namespaces can be concatenated
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 25: nested namespaces can be concatenated
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 24: nested namespaces can be concatenated
• Line 166: use auto when initializing with new to avoid duplicating the type name
• Line 170: use auto when initializing with new to avoid duplicating the type name
• Line 251: use auto when initializing with new to avoid duplicating the type name
• Line 252: use auto when initializing with new to avoid duplicating the type name
• Line 253: use auto when initializing with new to avoid duplicating the type name
• Line 254: use auto when initializing with new to avoid duplicating the type name
• Line 255: use auto when initializing with new to avoid duplicating the type name
• Line 282: use auto when initializing with a cast to avoid duplicating the type name
• Line 314: use auto when initializing with new to avoid duplicating the type name
• Line 315: use auto when initializing with new to avoid duplicating the type name
• Line 316: use auto when initializing with new to avoid duplicating the type name
• Line 317: use auto when initializing with new to avoid duplicating the type name
• Line 318: use auto when initializing with new to avoid duplicating the type name
• Line 365: use auto when initializing with a cast to avoid duplicating the type name
• Line 371: use auto when initializing with new to avoid duplicating the type name
• Line 445: use auto when initializing with a cast to avoid duplicating the type name
• Line 456: use auto when initializing with a cast to avoid duplicating the type name
• Line 520: Value stored to 'ThisOffsetX' is never read
• Line 566: use auto when initializing with a cast to avoid duplicating the type name
• Line 577: use auto when initializing with a cast to avoid duplicating the type name
• Line 805: use auto when initializing with a cast to avoid duplicating the type name
• Line 811: use auto when initializing with new to avoid duplicating the type name

src/internal/Command.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 325: Use operator && instead of and
• Line 325: Use operator ! instead of not
• Line 536: Use operator ! instead of not
• Line 537: Use operator ! instead of not
• Line 538: Use operator ! instead of not
• Line 550: Use operator ! instead of not
• Line 565: Use operator && instead of and
• Line 565: Use operator ! instead of not
• Line 570: Use operator && instead of and
• Line 570: Use operator ! instead of not
• Line 590: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 590: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 590: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 439: Add #include for string
• Line 415: Add #include for vector<>

Warnings

src/internal/Conversion.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 341: An unsigned integer appears to be used here.
• Line 343: An unsigned integer appears to be used here.
• Line 345: An unsigned integer appears to be used here.
• Line 347: An unsigned integer appears to be used here.
• Line 363: An unsigned integer appears to be used here.
• Line 365: An unsigned integer appears to be used here.
• Line 367: An unsigned integer appears to be used here.
• Line 369: An unsigned integer appears to be used here.
• Line 516: Namespace should be terminated with '// namespace convert '
• Line 517: Namespace should be terminated with '// namespace dbe '
• Line 508: Add #include for string
• Line 497: Add #include for vector<>

Warnings

• Line 21: nested namespaces can be concatenated
• Line 72: C-style casts are discouraged; use static_cast/const_cast/reinterpret_cast
• Line 76: C-style casts are discouraged; use static_cast/const_cast/reinterpret_cast
• Line 62: nested namespaces can be concatenated
• Line 9: nested namespaces can be concatenated
• Line 38: 'push_back' is called inside a loop; consider pre-allocating the container capacity before the loop
• Line 64: 'push_back' is called inside a loop; consider pre-allocating the container capacity before the loop
• Line 77: C-style casts are discouraged; use static_cast
• Line 79: C-style casts are discouraged; use static_cast
• Line 81: C-style casts are discouraged; use static_cast
• Line 83: C-style casts are discouraged; use static_cast
• Line 99: C-style casts are discouraged; use static_cast
• Line 101: C-style casts are discouraged; use static_cast
• Line 103: C-style casts are discouraged; use static_cast
• Line 105: C-style casts are discouraged; use static_cast
• Line 121: C-style casts are discouraged; use static_cast
• Line 123: C-style casts are discouraged; use static_cast
• Line 125: C-style casts are discouraged; use static_cast
• Line 127: C-style casts are discouraged; use static_cast
• Line 143: C-style casts are discouraged; use static_cast
• Line 145: C-style casts are discouraged; use static_cast
• Line 147: C-style casts are discouraged; use static_cast
• Line 149: C-style casts are discouraged; use static_cast
• Line 297: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 299: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 301: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 303: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 319: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 321: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 323: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 325: narrowing conversion from 'long' to signed type 'int32_t' (aka 'int') is implementation-defined
• Line 341: C-style casts are discouraged; use static_cast
• Line 343: C-style casts are discouraged; use static_cast
• Line 345: C-style casts are discouraged; use static_cast
• Line 347: C-style casts are discouraged; use static_cast
• Line 363: C-style casts are discouraged; use static_cast
• Line 365: C-style casts are discouraged; use static_cast
• Line 367: C-style casts are discouraged; use static_cast
• Line 369: C-style casts are discouraged; use static_cast
• Line 385: C-style casts are discouraged; use static_cast
• Line 387: C-style casts are discouraged; use static_cast
• Line 389: C-style casts are discouraged; use static_cast
• Line 391: C-style casts are discouraged; use static_cast
• Line 407: C-style casts are discouraged; use static_cast
• Line 409: C-style casts are discouraged; use static_cast
• Line 411: C-style casts are discouraged; use static_cast
• Line 413: C-style casts are discouraged; use static_cast
• Line 442: 'push_back' is called inside a loop; consider pre-allocating the container capacity before the loop
• Line 468: 'push_back' is called inside a loop; consider pre-allocating the container capacity before the loop

src/internal/MainWindow.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 354: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 53: Anonymous namespace should be terminated with '// namespace "" '
• Line 134: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 303: Small and focused functions are preferred: dbe::MainWindow::attach() has 95 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 312: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 313: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 359: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 361: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 373: Use operator ! instead of not
• Line 373: Use operator || instead of or
• Line 375: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 387: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 417: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 469: Use operator ! instead of not
• Line 563: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 605: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 789: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 793: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 827: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 833: Use of NULL #define found; prefer using the nullptr keyword
• Line 931: Use operator ! instead of not
• Line 1166: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1172: Use of NULL #define found; prefer using the nullptr keyword
• Line 1180: Use operator && instead of and
• Line 1216: If an else has a brace on one side, it should have it on both
• Line 1224: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1258: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1321: Use operator ! instead of not
• Line 1372: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1373: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1534: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1553: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1556: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 1565: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1584: Use operator ! instead of not
• Line 1601: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1603: Use operator ! instead of not
• Line 1611: Use operator && instead of and
• Line 1614: Use operator || instead of or
• Line 1615: Use operator || instead of or
• Line 1621: Use operator ! instead of not
• Line 1621: Use operator && instead of and
• Line 1647: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 1669: Small and focused functions are preferred: dbe::MainWindow::slot_process_externalchanges() has 122 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 1683: Use operator && instead of and
• Line 1703: Anonymous namespace should be terminated with '// namespace "" '
• Line 1791: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 1844: Use operator ! instead of not
• Line 1832: Add #include for string
• Line 1831: Add #include for list<>
• Line 1775: Add #include for vector<>
• Line 771: Add #include for unique_ptr<>

Warnings

src/internal/Preferences.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 34: declaration uses identifier 'dbe__Preferences', which is a reserved identifier
• Line 86: declaration uses identifier 'dbe__Preferences', which is a reserved identifier
• Line 98: nested namespaces can be concatenated
• Line 21: use nullptr
• Line 28: redundant access specifier has the same accessibility as the previous access specifier

src/internal/StyleUtility.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 23: initialization of 'AlertStatusBarPallete' with static storage duration may throw an exception that cannot be caught
• Line 24: initialization of 'AlertStatusBarPalleteWindow' with static storage duration may throw an exception that cannot be caught
• Line 25: initialization of 'WarningStatusBarPallete' with static storage duration may throw an exception that cannot be caught
• Line 26: initialization of 'WarningStatusBarPalleteWindow' with static storage duration may throw an exception that cannot be caught
• Line 27: initialization of 'PaleGreenPalleteButton' with static storage duration may throw an exception that cannot be caught
• Line 28: initialization of 'LoadedDefault' with static storage duration may throw an exception that cannot be caught

src/internal/Validator.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 18: use nullptr
• Line 28: use nullptr

src/internal/confaccessor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 58: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 59: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 62: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 249: Use operator ! instead of not
• Line 305: Use of reinterpret_cast can be dangerous. If there's no way to avoid its use add " // NOLINT" to the end of this line so this script will ignore it next time
• Line 311: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 372: Use operator && instead of and
• Line 394: Use operator ! instead of not
• Line 405: Use operator ! instead of not
• Line 403: Add #include for string
• Line 332: Add #include for list<>

Warnings

src/internal/config_api.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 111: Namespace should be terminated with '// namespace errors '
• Line 112: Namespace should be terminated with '// namespace config '
• Line 113: Namespace should be terminated with '// namespace dbe '

Warnings

• Line 62: nested namespaces can be concatenated
• Line 16: function-like macro 'xstrexp' used; consider a 'constexpr' template function
• Line 22: macro 'dbe_compiled_version' used to declare a constant; consider using a 'constexpr' constant
• Line 28: macro 'dbe_compiled_commit' used to declare a constant; consider using a 'constexpr' constant
• Line 28: nested namespaces can be concatenated
• Line 42: return type 'const std::string' (aka 'const basic_string') is 'const'-qualified at the top level, which may reduce code readability without improving const correctness
• Line 70: return type 'const std::string' (aka 'const basic_string') is 'const'-qualified at the top level, which may reduce code readability without improving const correctness
• Line 81: return type 'const std::string' (aka 'const basic_string') is 'const'-qualified at the top level, which may reduce code readability without improving const correctness
• Line 98: return type 'const std::string' (aka 'const basic_string') is 'const'-qualified at the top level, which may reduce code readability without improving const correctness
• Line 105: return type 'const std::string' (aka 'const basic_string') is 'const'-qualified at the top level, which may reduce code readability without improving const correctness

src/internal/config_api_commands.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 43: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 344: Namespace should be terminated with '// namespace file '
• Line 346: Namespace should be terminated with '// namespace commands '
• Line 347: Namespace should be terminated with '// namespace api '
• Line 348: Namespace should be terminated with '// namespace config '
• Line 349: Namespace should be terminated with '// namespace dbe '

Warnings

src/internal/config_api_get.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 266: Use operator ! instead of not
• Line 266: Use operator || instead of or
• Line 274: Use operator ! instead of not
• Line 274: Use operator || instead of or
• Line 298: Use operator ! instead of not
• Line 351: Namespace should be terminated with '// namespace get '
• Line 352: Namespace should be terminated with '// namespace api '
• Line 353: Namespace should be terminated with '// namespace config '
• Line 354: Namespace should be terminated with '// namespace dbe '
• Line 326: Add #include for string
• Line 181: Add #include for vector<>
• Line 318: Add #include for list<>

Warnings

src/internal/config_api_graph.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 45: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 96: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 188: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 211: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 236: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 310: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 341: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 165: Namespace should be terminated with '// namespace linked '
• Line 318: Use operator ! instead of not
• Line 329: Namespace should be terminated with '// namespace linked '
• Line 354: Namespace should be terminated with '// namespace linked '
• Line 359: Namespace should be terminated with '// namespace graph '
• Line 360: Namespace should be terminated with '// namespace api '
• Line 361: Namespace should be terminated with '// namespace config '
• Line 362: Namespace should be terminated with '// namespace dbe '
• Line 356: Add #include for vector<>
• Line 301: Add #include for string

Warnings

src/internal/config_api_info.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 22: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 41: Use operator ! instead of not
• Line 64: Use operator ! instead of not
• Line 103: Use operator ! instead of not
• Line 153: Use operator || instead of or
• Line 192: Namespace should be terminated with '// namespace info '
• Line 193: Namespace should be terminated with '// namespace api '
• Line 194: Namespace should be terminated with '// namespace config '
• Line 195: Namespace should be terminated with '// namespace dbe '
• Line 178: Add #include for string
• Line 164: Add #include for vector<>

Warnings

src/internal/config_api_set.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 62: Use operator ! instead of not
• Line 84: Namespace should be terminated with '// namespace noactions '
• Line 85: Namespace should be terminated with '// namespace set '
• Line 86: Namespace should be terminated with '// namespace api '
• Line 87: Namespace should be terminated with '// namespace config '
• Line 88: Namespace should be terminated with '// namespace dbe '
• Line 330: Small and focused functions are preferred: () has 186 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 332: Namespace should be terminated with '// namespace set '
• Line 333: Namespace should be terminated with '// namespace api '
• Line 334: Namespace should be terminated with '// namespace config '
• Line 335: Namespace should be terminated with '// namespace dbe '
• Line 319: Add #include for vector<>
• Line 154: Add #include for string

Warnings

src/internal/config_ui_info.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 247: Small and focused functions are preferred: () has 115 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 281: Use operator ! instead of not
• Line 350: Small and focused functions are preferred: () has 86 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 84: Add #include for string
• Line 249: Add #include for shared_ptr<>

Warnings

src/internal/datahandler.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 18: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 23: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 43: Use operator && instead of and
• Line 44: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 66: Use operator && instead of and
• Line 67: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 51: Add #include for string

Warnings

• Line 21: nested namespaces can be concatenated
• Line 72: C-style casts are discouraged; use static_cast/const_cast/reinterpret_cast
• Line 76: C-style casts are discouraged; use static_cast/const_cast/reinterpret_cast
• Line 62: nested namespaces can be concatenated
• Line 60: use nullptr
• Line 104: use nullptr
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 24: nested namespaces can be concatenated

src/internal/dbaccessor.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style

Warnings

• Line 25: nested namespaces can be concatenated
• Line 74: class 'rwdacc' was previously declared as a struct; this is valid, but may result in linker errors under the Microsoft C++ ABI
• Line 18: nested namespaces can be concatenated
• Line 20: initialization of 'database_concurrent_ptr' with static storage duration may throw an exception that cannot be caught

src/internal/dbcontroller.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 267: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 83: Use operator ! instead of not
• Line 87: Use operator ! instead of not
• Line 116: Use operator ! instead of not
• Line 123: Use operator ! instead of not
• Line 333: Use operator ! instead of not
• Line 354: Use operator ! instead of not
• Line 377: Use operator ! instead of not
• Line 428: Use operator ! instead of not
• Line 455: Use operator ! instead of not
• Line 474: Use operator ! instead of not
• Line 496: Namespace should be terminated with '// namespace inner '
• Line 394: Add #include for string
• Line 398: Add #include for vector<>
• Line 447: Add #include for shared_ptr<>

Warnings

src/internal/messenger.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 184: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 185: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 141: Use operator ! instead of not
• Line 164: Add #include for unique_ptr<>

Warnings

src/internal/messenger_proxy.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 58: C-style comment syntax detected; please use either C++ style "//" or Doxygen style
• Line 59: C-style comment syntax detected; please use either C++ style "//" or Doxygen style

Warnings

• Line 20: nested namespaces can be concatenated
• Line 15: nested namespaces can be concatenated

src/internal/rwdacc.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 102: Use operator ! instead of not
• Line 339: Small and focused functions are preferred: rwdacc::set_object() has 243 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 380: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()
• Line 411: A catch-all-exceptions construct was found in a file which doesn't contain int main(); this can only be used to wrap main()

Warnings

src/object/CustomLineEdit.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 38: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer

Warnings

• Line 18: use nullptr
• Line 36: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 141: use nullptr
• Line 156: use nullptr

src/object/SearchComboBox.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 19: use nullptr
• Line 25: redundant access specifier has the same accessibility as the previous access specifier

src/object/ValidatorComboBox.cpp

Errors

• Line 0: The standard copyright message wasn't found.

Warnings

• Line 49: redundant return statement at the end of a function with a void return type

src/object/string_attr_text_edit.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 38: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer

Warnings

• Line 18: use nullptr
• Line 36: 'if' statement is unnecessary; deleting null pointer has no effect
• Line 137: use nullptr
• Line 152: use nullptr

src/qtutils/highlighter.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 25: C-style comment syntax detected; please use either C++ style "//" or Doxygen style

Warnings

• Line 12: nested namespaces can be concatenated
• Line 34: use nullptr
• Line 56: variable 'length' is not initialized

src/qtutils/qdebugstream.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 12: Add #include for string

Warnings

• Line 13: nested namespaces can be concatenated
• Line 6: do not use pointer arithmetic
• Line 9: result of comparison of constant 18446744073709551615 with expression of type 'uint' (aka 'unsigned int') is always true
• Line 11: result of comparison of constant 18446744073709551615 with expression of type 'uint' (aka 'unsigned int') is always true
• Line 40: an integer is interpreted as a character code when assigning it to a string; if this is intended, cast the integer to the appropriate character type; if you want a string representation, use the appropriate conversion facility

src/structure/CustomDelegate.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 29: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 31: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 49: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 51: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 58: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 60: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 140: Small and focused functions are preferred: () has 91 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 146: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 150: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 163: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 170: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 183: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 183: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 183: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 234: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 260: Use of Run Time Type Information not allowed unless this code is meant to test other code

Warnings

• Line 26: declaration uses identifier 'dbe__EditCombo', which is a reserved identifier
• Line 55: declaration uses identifier 'dbe__EditCombo', which is a reserved identifier
• Line 64: nested namespaces can be concatenated
• Line 30: declaration uses identifier 'dbe__NumericAttributeWidgetForm', which is a reserved identifier
• Line 76: declaration uses identifier 'dbe__NumericAttributeWidgetForm', which is a reserved identifier
• Line 90: nested namespaces can be concatenated
• Line 33: declaration uses identifier 'dbe__RelationshipForm', which is a reserved identifier
• Line 98: declaration uses identifier 'dbe__RelationshipForm', which is a reserved identifier
• Line 109: nested namespaces can be concatenated
• Line 30: declaration uses identifier 'dbe__StringAttributeWidgetForm', which is a reserved identifier
• Line 79: declaration uses identifier 'dbe__StringAttributeWidgetForm', which is a reserved identifier
• Line 90: nested namespaces can be concatenated
• Line 112: nested namespaces can be concatenated
• Line 186: 'eventFilter' overrides a member function but is not marked 'override'
• Line 216: redundant access specifier has the same accessibility as the previous access specifier
• Line 222: 'closeEvent' overrides a member function but is not marked 'override'
• Line 265: 'eventFilter' overrides a member function but is not marked 'override'
• Line 270: 'closeEvent' overrides a member function but is not marked 'override'
• Line 272: 'setdefaults' overrides a member function but is not marked 'override'
• Line 315: 'setdefaults' overrides a member function but is not marked 'override'
• Line 319: 'closeEvent' overrides a member function but is not marked 'override'
• Line 365: 'setdata' overrides a member function but is not marked 'override'
• Line 371: 'eventFilter' overrides a member function but is not marked 'override'
• Line 372: 'wheelEvent' overrides a member function but is not marked 'override'
• Line 377: redundant access specifier has the same accessibility as the previous access specifier
• Line 402: 'buildtooltip' overrides a member function but is not marked 'override'
• Line 403: 'closeEvent' overrides a member function but is not marked 'override'
• Line 405: 'eventFilter' overrides a member function but is not marked 'override'
• Line 418: redundant access specifier has the same accessibility as the previous access specifier
• Line 20: use nullptr
• Line 18: use nullptr
• Line 62: nested namespaces can be concatenated
• Line 60: use nullptr
• Line 104: use nullptr
• Line 18: use nullptr
• Line 28: use nullptr
• Line 30: nested namespaces can be concatenated
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 19: function-like macro 'MODEL_COMMON_INTERFACE_TYPES' used; consider a 'constexpr' template function
• Line 30: function-like macro 'MODEL_COMMON_IMPL_REQ_DEF' used; consider a 'constexpr' template function
• Line 59: function-like macro 'MODEL_COMMON_INTERFACE_REQ_DEF' used; consider a 'constexpr' template function
• Line 75: function-like macro 'MODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 80: function-like macro 'MODEL_DELETE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 83: function-like macro 'MODEL_CREATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 86: function-like macro 'MODEL_UPDATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 89: function-like macro 'MODEL_RENAME_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 103: function-like macro 'MODEL_COMMON_INTERFACE_LOOKUP_IMPL' used; consider a 'constexpr' template function
• Line 110: function-like macro 'MODEL_COMMON_INTERFACE_DELETE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 117: function-like macro 'MODEL_COMMON_INTERFACE_CREATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 125: function-like macro 'MODEL_COMMON_INTERFACE_RENAME_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 133: function-like macro 'MODEL_COMMON_INTERFACE_UPDATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 145: function-like macro 'MODEL_COMMON_INTERFACE_SLOTS_DEF' used; consider a 'constexpr' template function
• Line 165: use auto when declaring iterators
• Line 200: use auto when declaring iterators
• Line 18: use nullptr
• Line 19: nested namespaces can be concatenated
• Line 102: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 103: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 104: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 105: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 17: nested namespaces can be concatenated
• Line 40: use nullptr
• Line 46: 'setData' overrides a member function but is not marked 'override'
• Line 51: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 53: 'lessThan' overrides a member function but is not marked 'override'
• Line 59: redundant access specifier has the same accessibility as the previous access specifier
• Line 60: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 61: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 62: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 63: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 24: nested namespaces can be concatenated
• Line 28: use auto when initializing with a cast to avoid duplicating the type name
• Line 31: use auto when initializing with a cast to avoid duplicating the type name
• Line 51: use auto when initializing with a cast to avoid duplicating the type name
• Line 53: use auto when initializing with new to avoid duplicating the type name
• Line 60: use auto when initializing with a cast to avoid duplicating the type name
• Line 65: use auto when initializing with new to avoid duplicating the type name
• Line 81: use auto when initializing with new to avoid duplicating the type name
• Line 108: use auto when initializing with new to avoid duplicating the type name
• Line 119: use auto when initializing with new to avoid duplicating the type name
• Line 127: use auto when initializing with new to avoid duplicating the type name
• Line 145: use auto when initializing with a cast to avoid duplicating the type name
• Line 150: use auto when initializing with a cast to avoid duplicating the type name
• Line 152: Called C++ object pointer is null
• Line 162: use auto when initializing with a cast to avoid duplicating the type name
• Line 170: use auto when initializing with a cast to avoid duplicating the type name
• Line 230: use auto when initializing with a cast to avoid duplicating the type name
• Line 230: do not use static_cast to downcast from a base to a derived class; use dynamic_cast instead
• Line 234: use nullptr
• Line 262: use auto when initializing with a cast to avoid duplicating the type name
• Line 262: do not use static_cast to downcast from a base to a derived class; use dynamic_cast instead
• Line 276: use auto when initializing with a template cast to avoid duplicating the type name
• Line 288: use auto when initializing with a template cast to avoid duplicating the type name

src/structure/CustomFileView.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 97: If an else has a brace on one side, it should have it on both
• Line 105: If an else has a brace on one side, it should have it on both
• Line 179: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 201: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer

Warnings

• Line 53: declaration uses identifier 'dbe__CreateDatabaseWidget', which is a reserved identifier
• Line 174: declaration uses identifier 'dbe__CreateDatabaseWidget', which is a reserved identifier
• Line 218: nested namespaces can be concatenated
• Line 42: redundant access specifier has the same accessibility as the previous access specifier
• Line 45: redundant access specifier has the same accessibility as the previous access specifier
• Line 62: nested namespaces can be concatenated
• Line 27: use nullptr
• Line 72: redundant access specifier has the same accessibility as the previous access specifier
• Line 28: use nullptr
• Line 46: redundant access specifier has the same accessibility as the previous access specifier
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: no definition found for 'class_t', but a definition with the same name 'class_t' found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 24: nested namespaces can be concatenated
• Line 210: use auto when initializing with new to avoid duplicating the type name
• Line 211: use auto when initializing with new to avoid duplicating the type name
• Line 222: use auto when initializing with new to avoid duplicating the type name
• Line 229: use auto when initializing with new to avoid duplicating the type name

src/structure/CustomTableView.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 80: If an else has a brace on one side, it should have it on both
• Line 94: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 181: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 219: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 222: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 226: Use operator ! instead of not
• Line 242: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 244: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 262: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 264: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 283: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 285: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 288: Use operator && instead of and
• Line 292: Use operator ! instead of not
• Line 303: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 303: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 303: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 325: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 329: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 390: Use operator ! instead of not
• Line 304: Add #include for string
• Line 314: Add #include for vector<>

Warnings

src/structure/CustomTreeView.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 58: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 177: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 185: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 187: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 193: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 202: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 207: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 210: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 211: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 234: Use operator && instead of and
• Line 240: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 247: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 281: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 299: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 328: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 331: Use operator && instead of and
• Line 339: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 339: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 339: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 357: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 372: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 388: Use operator ! instead of not
• Line 395: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 440: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 453: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 444: Add #include for vector<>

Warnings

src/structure/FileInfo.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 37: Use of NULL #define found; prefer using the nullptr keyword
• Line 55: Use of NULL #define found; prefer using the nullptr keyword
• Line 172: If an else has a brace on one side, it should have it on both
• Line 204: If an else has a brace on one side, it should have it on both
• Line 331: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 468: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 527: If an else has a brace on one side, it should have it on both
• Line 29: Add #include
• Line 29: Add #include for set<>
• Line 365: Add #include for string
• Line 173: Add #include for vector<>

Warnings

src/structure/FileModel.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 155: Use of NULL #define found; prefer using the nullptr keyword
• Line 180: Add #include for string
• Line 180: Add #include for list<>

Warnings

• Line 115: declaration uses identifier 'dbe__MainWindow', which is a reserved identifier
• Line 498: declaration uses identifier 'dbe__MainWindow', which is a reserved identifier
• Line 653: nested namespaces can be concatenated
• Line 20: use nullptr
• Line 45: redundant access specifier has the same accessibility as the previous access specifier
• Line 30: use nullptr
• Line 49: redundant access specifier has the same accessibility as the previous access specifier
• Line 28: 'contextMenuEvent' overrides a member function but is not marked 'override'
• Line 34: 'slot_delete_objects' overrides a member function but is not marked 'override'
• Line 35: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 36: 'slot_edit_object' overrides a member function but is not marked 'override'
• Line 37: 'slot_copy_object' overrides a member function but is not marked 'override'
• Line 62: nested namespaces can be concatenated
• Line 30: default arguments on virtual or override methods are prohibited
• Line 32: default arguments on virtual or override methods are prohibited
• Line 60: use nullptr
• Line 104: use nullptr
• Line 120: redundant access specifier has the same accessibility as the previous access specifier
• Line 19: use nullptr
• Line 25: redundant access specifier has the same accessibility as the previous access specifier
• Line 26: use nullptr
• Line 33: function-like macro 'TREEMODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 30: nested namespaces can be concatenated
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 19: function-like macro 'MODEL_COMMON_INTERFACE_TYPES' used; consider a 'constexpr' template function
• Line 30: function-like macro 'MODEL_COMMON_IMPL_REQ_DEF' used; consider a 'constexpr' template function
• Line 59: function-like macro 'MODEL_COMMON_INTERFACE_REQ_DEF' used; consider a 'constexpr' template function
• Line 75: function-like macro 'MODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 80: function-like macro 'MODEL_DELETE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 83: function-like macro 'MODEL_CREATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 86: function-like macro 'MODEL_UPDATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 89: function-like macro 'MODEL_RENAME_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 103: function-like macro 'MODEL_COMMON_INTERFACE_LOOKUP_IMPL' used; consider a 'constexpr' template function
• Line 110: function-like macro 'MODEL_COMMON_INTERFACE_DELETE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 117: function-like macro 'MODEL_COMMON_INTERFACE_CREATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 125: function-like macro 'MODEL_COMMON_INTERFACE_RENAME_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 133: function-like macro 'MODEL_COMMON_INTERFACE_UPDATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 145: function-like macro 'MODEL_COMMON_INTERFACE_SLOTS_DEF' used; consider a 'constexpr' template function
• Line 165: use auto when declaring iterators
• Line 200: use auto when declaring iterators
• Line 20: nested namespaces can be concatenated
• Line 48: 'getnode' overrides a member function but is not marked 'override'
• Line 52: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 54: 'lessThan' overrides a member function but is not marked 'override'
• Line 69: redundant access specifier has the same accessibility as the previous access specifier
• Line 70: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 71: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 72: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 73: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 19: nested namespaces can be concatenated
• Line 102: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 103: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 104: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 105: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 17: nested namespaces can be concatenated
• Line 40: use nullptr
• Line 46: 'setData' overrides a member function but is not marked 'override'
• Line 51: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 53: 'lessThan' overrides a member function but is not marked 'override'
• Line 59: redundant access specifier has the same accessibility as the previous access specifier
• Line 60: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 61: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 62: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 63: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 59: default arguments on virtual or override methods are prohibited
• Line 61: default arguments on virtual or override methods are prohibited
• Line 93: redundant access specifier has the same accessibility as the previous access specifier
• Line 96: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 97: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 98: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 99: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 19: nested namespaces can be concatenated
• Line 45: use nullptr
• Line 50: 'fetchMore' overrides a member function but is not marked 'override'
• Line 52: 'hasChildren' overrides a member function but is not marked 'override'
• Line 54: 'canFetchMore' overrides a member function but is not marked 'override'
• Line 66: 'filterAcceptsRow' overrides a member function but is not marked 'override'
• Line 68: 'lessThan' overrides a member function but is not marked 'override'
• Line 73: redundant access specifier has the same accessibility as the previous access specifier
• Line 89: redundant access specifier has the same accessibility as the previous access specifier
• Line 90: 'slot_create_object' overrides a member function but is not marked 'override'
• Line 91: 'slot_remove_object' overrides a member function but is not marked 'override'
• Line 92: 'slot_update_object' overrides a member function but is not marked 'override'
• Line 93: 'slot_rename_object' overrides a member function but is not marked 'override'
• Line 24: nested namespaces can be concatenated
• Line 56: default arguments on virtual or override methods are prohibited
• Line 83: default arguments on virtual or override methods are prohibited
• Line 155: use nullptr
• Line 157: do not manage memory manually; use RAII
• Line 189: loop variable is copied but only used as const reference; consider making it a const reference

src/structure/TableNode.cpp

Errors

• Line 0: The standard copyright message wasn't found.

src/structure/model_common_interface.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 6: C-style comment syntax detected; please use either C++ style "//" or Doxygen style

Warnings

• Line 62: nested namespaces can be concatenated
• Line 60: use nullptr
• Line 104: use nullptr
• Line 30: nested namespaces can be concatenated
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 19: function-like macro 'MODEL_COMMON_INTERFACE_TYPES' used; consider a 'constexpr' template function
• Line 30: function-like macro 'MODEL_COMMON_IMPL_REQ_DEF' used; consider a 'constexpr' template function
• Line 59: function-like macro 'MODEL_COMMON_INTERFACE_REQ_DEF' used; consider a 'constexpr' template function
• Line 75: function-like macro 'MODEL_REMOVE_ROWS_DEF' used; consider a 'constexpr' template function
• Line 80: function-like macro 'MODEL_DELETE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 83: function-like macro 'MODEL_CREATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 86: function-like macro 'MODEL_UPDATE_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 89: function-like macro 'MODEL_RENAME_OBJECTS_DEF' used; consider a 'constexpr' template function
• Line 103: function-like macro 'MODEL_COMMON_INTERFACE_LOOKUP_IMPL' used; consider a 'constexpr' template function
• Line 110: function-like macro 'MODEL_COMMON_INTERFACE_DELETE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 117: function-like macro 'MODEL_COMMON_INTERFACE_CREATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 125: function-like macro 'MODEL_COMMON_INTERFACE_RENAME_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 133: function-like macro 'MODEL_COMMON_INTERFACE_UPDATE_THAT_OBJ_IMPL' used; consider a 'constexpr' template function
• Line 145: function-like macro 'MODEL_COMMON_INTERFACE_SLOTS_DEF' used; consider a 'constexpr' template function
• Line 165: use auto when declaring iterators
• Line 200: use auto when declaring iterators
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 24: nested namespaces can be concatenated

src/structure/subtreeproxy.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 123: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 137: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 151: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 184: Use operator ! instead of not
• Line 194: Use operator || instead of or
• Line 200: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 204: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 214: Use operator || instead of or
• Line 217: Use operator || instead of or
• Line 242: Use operator && instead of and
• Line 242: Use operator ! instead of not
• Line 253: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 253: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 253: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 268: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 268: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 268: Missing email address in TODO comment; it should appear on the same line as the TODO
• Line 275: Missing date in TODO comment; it should appear on same line as the TODO, preferably in a form like "Apr-14-2020"
• Line 275: Missing author name in TODO comment; it should appear on the same line as the TODO, as Firstname Lastname
• Line 275: Missing email address in TODO comment; it should appear on the same line as the TODO

Warnings

src/structure/table.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 80: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 83: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 94: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 97: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 113: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 122: If an else has a brace on one side, it should have it on both
• Line 122: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 163: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 166: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 170: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 172: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 355: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 360: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 380: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 390: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 395: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 548: Use operator || instead of or
• Line 569: Use operator && instead of and
• Line 570: Use operator && instead of and
• Line 570: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 573: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 575: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 616: Use operator || instead of or
• Line 630: Use operator && instead of and
• Line 631: Use operator && instead of and
• Line 631: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 638: The delete operator appears to be used; owning memory should be done with a smart pointer rather than a raw pointer
• Line 537: Add #include for vector<>
• Line 302: Add #include for string

Warnings

src/structure/tableselection.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 28: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 146: An unsigned integer appears to be used here.
• Line 165: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 186: Use of Run Time Type Information not allowed unless this code is meant to test other code

Warnings

src/structure/tree.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 103: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 129: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 154: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 179: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 207: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 362: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 378: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 385: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 393: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 438: Use operator && instead of and
• Line 438: Use operator ! instead of not
• Line 455: Use operator ! instead of not
• Line 213: Add #include for string
• Line 417: Add #include for vector<>

Warnings

src/structure/treenode.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 167: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 230: Use operator ! instead of not
• Line 372: Add #include for vector<>

Warnings

• Line 62: nested namespaces can be concatenated
• Line 60: use nullptr
• Line 104: use nullptr
• Line 26: nested namespaces can be concatenated
• Line 37: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 27: declaration 'relationship_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 28: declaration 'attribute_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::config'
• Line 32: nested namespaces can be concatenated
• Line 46: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 28: declaration 'class_t' is never referenced, but a declaration with the same name found in another namespace 'dunedaq::conffwk'
• Line 34: nested namespaces can be concatenated
• Line 23: nested namespaces can be concatenated
• Line 32: nested namespaces can be concatenated
• Line 178: do not use const_cast to remove const qualifier
• Line 463: use auto when initializing with a cast to avoid duplicating the type name
• Line 463: redundant get() call on smart pointer
• Line 493: use auto when initializing with a cast to avoid duplicating the type name
• Line 71: operator=() should return 'config_object_description&'
• Line 24: nested namespaces can be concatenated
• Line 28: default arguments on virtual or override methods are prohibited
• Line 67: 'GetData' overrides a member function but is not marked 'override'
• Line 88: default arguments on virtual or override methods are prohibited
• Line 99: default arguments on virtual or override methods are prohibited
• Line 111: default arguments on virtual or override methods are prohibited
• Line 24: nested namespaces can be concatenated
• Line 64: default arguments on virtual or override methods are prohibited
• Line 90: do not use const_cast to remove const qualifier
• Line 195: default arguments on virtual or override methods are prohibited
• Line 197: potential uncovered code path; add a default label
• Line 259: default arguments on virtual or override methods are prohibited
• Line 261: potential uncovered code path; add a default label
• Line 301: use auto when initializing with new to avoid duplicating the type name
• Line 316: default arguments on virtual or override methods are prohibited
• Line 318: potential uncovered code path; add a default label
• Line 392: default arguments on virtual or override methods are prohibited
• Line 394: potential uncovered code path; add a default label

src/structure/treeselection.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 81: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 98: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 113: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 142: Use of Run Time Type Information not allowed unless this code is meant to test other code
• Line 223: Increment/decrement operator should appear alone on its line unless in a while/for loop head
• Line 316: Use operator && instead of and
• Line 316: Use operator ! instead of not
• Line 72: Add #include for vector<>

Warnings

src/widgets/BatchChangeWidget.cpp

Errors

• Line 0: The standard copyright message wasn't found.
• Line 213: Use operator && instead of and
• Line 214: Use operator || instead of or
• Line 233: Small and focused functions are preferred: () has 81 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 351: Use operator ! instead of not
• Line 358: Use operator ! instead of not
• Line 427: Small and focused functions are preferred: dbe::BatchChangeWidget::MakeChanges() has 87 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 531: Small and focused functions are preferred: dbe::BatchChangeWidget::FindMatching() has 81 non-comment lines (error triggered by exceeding 80 lines) (disable this by putting "// NOLINT" after the function's closing brace.)
• Line 622: Add #include for vector<>
• Line 191: Add #include for string
• Line 467: Add #include for unique_ptr<>

Warnings